Our company switched phone systems over to the Samsung OfficeServ back in '08 when we moved. Back then, our admin recorded a day greeting, night greeting, along with instructions for Spanish callers and a company directory.
However, no changes have been made to these recordings since '08, which means that a lot of the people who are named on those recordings have either left the company or changed extensions.
I've looked up online and read through all the manual and instructions for the Samsung phone and for the OfficeServ database system. Unfortunately the only thing I've found are instructions on how to change the day and night recordings - nothing on how to change the Company Directory.
Any suggestions?How do I change the Company Directory recording on a Samsung iDCS 18D phone?
The Samsung iDCS 18D is the typical deskset for the newer iDCS phone systems. This phone is sometimes referred to as being in the ';Falcon'; series. The iDCS 18D is an 18 button digital phone intended for use with all Samsung DCS and iDCS phone systems.
Monday, November 22, 2010
How to change file save path on azureus vuze?
Hi, i have a simple query. I'm downloading 2g of movies through vuze. There's not enough space on my disk C for all that so i want to change the save path to disk d.
I've tried to ';change the directory on the 'Files' section on the menu to whatever directory you wish to save your downloads.';
as per FAQ page:
http://faq.vuze.com/?View=entry%26amp;EntryID=102
and retargetting each file as per:
http://faq.vuze.com/?View=entry%26amp;EntryID=158
neither worked..help would be splendid thankyouHow to change file save path on azureus vuze?
The save directory change will only work for new downloads.
As to moving the existing files, stop the torrent and right-click%26gt;Advanced%26gt;Files%26gt; Move Data Files and browse to you new location. Azureus will show a small screen indicating the transfer and when that is gone, restart the torrent and it should work.How to change file save path on azureus vuze?
if you havent started the download, then when you add it there should be an option asking where you wish to save, just navigate to the d drive and hit okay
I've tried to ';change the directory on the 'Files' section on the menu to whatever directory you wish to save your downloads.';
as per FAQ page:
http://faq.vuze.com/?View=entry%26amp;EntryID=102
and retargetting each file as per:
http://faq.vuze.com/?View=entry%26amp;EntryID=158
neither worked..help would be splendid thankyouHow to change file save path on azureus vuze?
The save directory change will only work for new downloads.
As to moving the existing files, stop the torrent and right-click%26gt;Advanced%26gt;Files%26gt; Move Data Files and browse to you new location. Azureus will show a small screen indicating the transfer and when that is gone, restart the torrent and it should work.How to change file save path on azureus vuze?
if you havent started the download, then when you add it there should be an option asking where you wish to save, just navigate to the d drive and hit okay
How to install a CD using Command promt or run menu in windows?
Hello, i' ve just got a CD/DVD, the installation instruction says:';Open ';Command Prompt'; or ';Run'; and change the directory to where CD-ROM/DVD-ROM is located, i.e. D:\
To run each PART, copy and paste the following directory and then, hit enter.
You can also copy all of the files to the HD and run the above instruction.
So i have a hard time understanding and installing this cd/dvd, please help.How to install a CD using Command promt or run menu in windows?
after inserting your cd you open the command prompt and the type D: and go to you cd/dvd drive then by dir command you check the list of file where try to find a exe file which name is like setup or install when you find the file type the file name in the command prompt and press enter your cd installation is start.
but if your cd/dvd driver need some extra supporting file which are create in the same directory then this file is not create in the cd/dvd because it is not write in this. Due to this reason I think the following instruction is give in your cd/dvd driver.How to install a CD using Command promt or run menu in windows?
sometimes when you put a program cd in, the cd will not start automatically. most of the time they do. open the command prompt and then change the path to the cd. like you will be at c: when you start, type cd e: if e is your cd rom. when the prompt says e: type dir and look for an exe file. the exe file will be the extension of a excuteable file like install.exe or setup.exe. when you find the file just type the name of the file and it will start for you.
jerry r.
the only ways are....
1. Default the CMOS
==Restart your pc
==Hit quickly the ';DELETE'; button when computer restarts
==Then press the mode that sets you pc to default
';i didn't say the exact word of you trying to press in that default, cuz every motherboard has different CMOS';
2. Restart the CMOS
==Turn off you pc
==Open your cpu (by screw driver etc.)
==In the motherboard, near the flat batter, there is a tiny 2- socketed chip attached to 2 of 3 pins.
==then you do is take out that chip then put it to the other side of the pin that i mention
Ex.
Legend: # =Chip/ + =Pins
# # +
This will be the position earlier
+ # #
Then you be put it the another side
After 10 secs....
# # +
Put it to its original place
==then after that, open you pc
PLS.. TRY IT IF YOU UNDERSTANDmole on your skin hip hop abs program
To run each PART, copy and paste the following directory and then, hit enter.
You can also copy all of the files to the HD and run the above instruction.
So i have a hard time understanding and installing this cd/dvd, please help.How to install a CD using Command promt or run menu in windows?
after inserting your cd you open the command prompt and the type D: and go to you cd/dvd drive then by dir command you check the list of file where try to find a exe file which name is like setup or install when you find the file type the file name in the command prompt and press enter your cd installation is start.
but if your cd/dvd driver need some extra supporting file which are create in the same directory then this file is not create in the cd/dvd because it is not write in this. Due to this reason I think the following instruction is give in your cd/dvd driver.How to install a CD using Command promt or run menu in windows?
sometimes when you put a program cd in, the cd will not start automatically. most of the time they do. open the command prompt and then change the path to the cd. like you will be at c: when you start, type cd e: if e is your cd rom. when the prompt says e: type dir and look for an exe file. the exe file will be the extension of a excuteable file like install.exe or setup.exe. when you find the file just type the name of the file and it will start for you.
jerry r.
the only ways are....
1. Default the CMOS
==Restart your pc
==Hit quickly the ';DELETE'; button when computer restarts
==Then press the mode that sets you pc to default
';i didn't say the exact word of you trying to press in that default, cuz every motherboard has different CMOS';
2. Restart the CMOS
==Turn off you pc
==Open your cpu (by screw driver etc.)
==In the motherboard, near the flat batter, there is a tiny 2- socketed chip attached to 2 of 3 pins.
==then you do is take out that chip then put it to the other side of the pin that i mention
Ex.
Legend: # =Chip/ + =Pins
# # +
This will be the position earlier
+ # #
Then you be put it the another side
After 10 secs....
# # +
Put it to its original place
==then after that, open you pc
PLS.. TRY IT IF YOU UNDERSTAND
Directory to save pictures...?
ok i have been looking for this hours with no luck and so i want to see how good are you people! just kidding...i manage to find out how to change the directory when you click ';save target as'; from the registry and was successful. now i cant find the one for ';save picture as'; or sometimes called ';save image as'; where is it in the registry!Directory to save pictures...?
Since you were successful in editing the registry before, obviously you know enough about it that you're not going to kill your computer. Replace My Pictures in the following 2 registry enties with the desired folder name.
NOTE: I had to change the slashes to spaces in order for this to display correctly. Where there is supposed to be an actual spaces is *
HKEY_CURRENT_USER Software Microsoft Windows CurrentVersion
Explorer Shell*Folders My*Pictures
HKEY_CURRENT_USER Software Microsoft Windows CurrentVersion Explorer User*Shell*Folders My*PicturesDirectory to save pictures...?
Do not look in the registry for this. Making changes in the registry can kill your pc if you don't know what you are doing. In the ';My Documents'; folder there is a folder called ';My Pictures';. This is where you should put your pictures unless you create another folder.
Since you were successful in editing the registry before, obviously you know enough about it that you're not going to kill your computer. Replace My Pictures in the following 2 registry enties with the desired folder name.
NOTE: I had to change the slashes to spaces in order for this to display correctly. Where there is supposed to be an actual spaces is *
HKEY_CURRENT_USER Software Microsoft Windows CurrentVersion
Explorer Shell*Folders My*Pictures
HKEY_CURRENT_USER Software Microsoft Windows CurrentVersion Explorer User*Shell*Folders My*PicturesDirectory to save pictures...?
Do not look in the registry for this. Making changes in the registry can kill your pc if you don't know what you are doing. In the ';My Documents'; folder there is a folder called ';My Pictures';. This is where you should put your pictures unless you create another folder.
How can i change the (default) program install drive from C: to D:?
my harddrive is partitioned into C: and D:. C: has just the OS, D: is where i stash all of my programs and files etc. alot of times i will run into an installation that WONT give me the option to change the directory to install to. it automatically tries to stuff its 500+MB self into the C: drive (which only has a measley 100MB free space) and it fails.
now if there was an option to change that default path from crowded C:, to the vast welcoming plains of D:, there wouldnt be a ****ing problem. now i've once had someone type up something in the ';Run..'; and have a simple window appear. he simply pressed a few buttons and all is well. problem is the pc went thru system recovery and the guy forgot what it was he typed in.
i hear others suggest downloading a ';tweakUI';, but i dont remember that necessary, i hear others have a hard time with it as well. so if you KNOW of THE way. please. help out. if not, dont bother with an asinine reply just to boost to your ';top contributor'; count.How can i change the (default) program install drive from C: to D:?
You can't unfortunately. It automatically sets the default to the disk that contains the windows files. You can however normally change the destination of where the program installsHow can i change the (default) program install drive from C: to D:?
it looks like you didnt read the bulk of the message. just saw the header and jumped right in, slapped on a rediculous ';answer'; and collected your points.
if you did read what i typed up, you would have learned that YES there IS a way to change it. ive experienced it myself. and NO you cant always change the directory/path/drive youd like the installer to install to. TRUST ME. there ARE some programs that DONT let you chose. you also missed the part about not answering if you dont know the answer.
now if there was an option to change that default path from crowded C:, to the vast welcoming plains of D:, there wouldnt be a ****ing problem. now i've once had someone type up something in the ';Run..'; and have a simple window appear. he simply pressed a few buttons and all is well. problem is the pc went thru system recovery and the guy forgot what it was he typed in.
i hear others suggest downloading a ';tweakUI';, but i dont remember that necessary, i hear others have a hard time with it as well. so if you KNOW of THE way. please. help out. if not, dont bother with an asinine reply just to boost to your ';top contributor'; count.How can i change the (default) program install drive from C: to D:?
You can't unfortunately. It automatically sets the default to the disk that contains the windows files. You can however normally change the destination of where the program installsHow can i change the (default) program install drive from C: to D:?
it looks like you didnt read the bulk of the message. just saw the header and jumped right in, slapped on a rediculous ';answer'; and collected your points.
if you did read what i typed up, you would have learned that YES there IS a way to change it. ive experienced it myself. and NO you cant always change the directory/path/drive youd like the installer to install to. TRUST ME. there ARE some programs that DONT let you chose. you also missed the part about not answering if you dont know the answer.
How do I get two cisco 7940 phones to ring simultaneously without using a shared line?
I have a person that works in two separate offices as a manager. Each office is in a separate location, dev pool, partition...etc, and each has a different directory number. The current manager will switch locations on a regular basis and wants to have it so it doesn't matter if one or the other line is called, it will ring in either office. Presumably, a new person will soon be hired to take over as manager in one or the other office, so I don't want to implement sharing the lines between offices, because although that might be the easiest solution, it's not good to have lines from different partitions appearing all over the network on devices in other partitions...it could quickly become a mess.
So, I'd just like to have both numbers ring at the same time when one or the other is called. I was looking at line groups and hunt lists, but don't want to create a new hunt pilot number that people have to remember to call, or they'd have to change the directory listing.How do I get two cisco 7940 phones to ring simultaneously without using a shared line?
What you need to do is click on the Menu button and select Other then click on the Extra features menu and go down to Simultaneous Ring. Fill in the appropriate info and there you go.
So, I'd just like to have both numbers ring at the same time when one or the other is called. I was looking at line groups and hunt lists, but don't want to create a new hunt pilot number that people have to remember to call, or they'd have to change the directory listing.How do I get two cisco 7940 phones to ring simultaneously without using a shared line?
What you need to do is click on the Menu button and select Other then click on the Extra features menu and go down to Simultaneous Ring. Fill in the appropriate info and there you go.
Change the Run directory Cmd?
when i open up the run command and type ';cmd'; the directory that shows is ';C:\Documents and settings\Mizu%26gt;'; How can i change it to just ';C:\'; ?
It will help greatly.Change the Run directory Cmd?
type cd\Change the Run directory Cmd?
Type : cd.. (Then press enter) until you reach C:\
Type ';command.com C:'; in the run window.
This will open your DOS emulator to just C:
If you use ';cmd'; it won't work, and you will have to type cd\
It will help greatly.Change the Run directory Cmd?
type cd\Change the Run directory Cmd?
Type : cd.. (Then press enter) until you reach C:\
Type ';command.com C:'; in the run window.
This will open your DOS emulator to just C:
If you use ';cmd'; it won't work, and you will have to type cd\
Why does cd 4.4.1 and cd 4 4 1 not work? (How can I change to a directory with space or dot in its name)?
How to change mac icon appearances?
I already know the long manual process one can do to change how icons appear, but I was wondering if I could simply change a basic directory for the icons so all would change instead of going one by one.
Is there any way to do this on a mac? Again, I know the manual one by one way of copy and paste. I want to alter all icon appearances in one place if possible.How to change mac icon appearances?
Hi this is karthik ';axekarthik@yahoo.in';.
U need to download softwares to change the Icon appearance for Multiple Folders. Check out this Link, hope it will help u..
( http://www.brighthub.com/computing/mac-platform/articles/23995.aspx )
Check It Out..
Is there any way to do this on a mac? Again, I know the manual one by one way of copy and paste. I want to alter all icon appearances in one place if possible.How to change mac icon appearances?
Hi this is karthik ';axekarthik@yahoo.in';.
U need to download softwares to change the Icon appearance for Multiple Folders. Check out this Link, hope it will help u..
( http://www.brighthub.com/computing/mac-platform/articles/23995.aspx )
Check It Out..
Can I have the title line on my Yahoo Directory listing changed?
My current title is Neuro-VISION Video Appetite Control Hypnosis %26amp; Control Programs. I want to change it to Neuro-VISION Video Weight Loss Hypnosis %26amp; Stop Smoking Hypnosis. How can I do this?Can I have the title line on my Yahoo Directory listing changed?
If it is in your favorites, just right click it and edit it.Can I have the title line on my Yahoo Directory listing changed?
You obviously have no idea what you are talking about. You are obviously talking about a short cut. I'm talking about a $300.00 listing in the Yahoo Directory.
If it is in your favorites, just right click it and edit it.Can I have the title line on my Yahoo Directory listing changed?
You obviously have no idea what you are talking about. You are obviously talking about a short cut. I'm talking about a $300.00 listing in the Yahoo Directory.
Report Abuse
I have two volumes in my Computer. C: and V:. When I open the Command Prompt, the directory is C:\Users (cont)?
How do I change the directory to my V:? What command can be used?
the command cd\v: doesn't work as expected!I have two volumes in my Computer. C: and V:. When I open the Command Prompt, the directory is C:\Users (cont)?
';cd\v: doesn't work as expected';
The problem is that you are apparently ';expecting'; to change drives with a ';change directory'; command!
Just type ';v:'; at the c:\ prompt and it will change to v:\
Good luck!I have two volumes in my Computer. C: and V:. When I open the Command Prompt, the directory is C:\Users (cont)?
Just type V:
c: and v: are diffrent drives, you cannot cd betwen them.
Just type v: to change to the v: drive
the command cd\v: doesn't work as expected!I have two volumes in my Computer. C: and V:. When I open the Command Prompt, the directory is C:\Users (cont)?
';cd\v: doesn't work as expected';
The problem is that you are apparently ';expecting'; to change drives with a ';change directory'; command!
Just type ';v:'; at the c:\ prompt and it will change to v:\
Good luck!I have two volumes in my Computer. C: and V:. When I open the Command Prompt, the directory is C:\Users (cont)?
Just type V:
c: and v: are diffrent drives, you cannot cd betwen them.
Just type v: to change to the v: drive
What impact does changing the Program Files directory have on installed apps in XP?
Hi.
I recently found a way to change the directory location of the Program Files folder (and also the Common Files folder) to a different place on the disk (or a different disk altogether), but from all of the articles I have found on the web that explain how to do this, they all seem to be saying how to change the directory BEFORE having installed any apps. I have around 2GB of applications, and I want to change the directory to a different disk. Will this change of location have a bad impact on my apps that I have already installed? (Obviously I am going to move these applications across to the new location).
My plan was to change the registry, restart my PC, then just drag and drop the apps into the new location on my D: drive. I need to do this because my C: drive doesn't have enough space left to defrag the paging file. Will this method work?
Thanks to everyone who offers an opinion in an advance.
Source: http://www.pctools.com/guides/registry/detail/1137/What impact does changing the Program Files directory have on installed apps in XP?
That tool only changes the default for installing an application. You would need to change all the other registry values for the programs you already have installed.
I would recommend uninstalling the old applications and reinstalling the applications after the change.
I recently found a way to change the directory location of the Program Files folder (and also the Common Files folder) to a different place on the disk (or a different disk altogether), but from all of the articles I have found on the web that explain how to do this, they all seem to be saying how to change the directory BEFORE having installed any apps. I have around 2GB of applications, and I want to change the directory to a different disk. Will this change of location have a bad impact on my apps that I have already installed? (Obviously I am going to move these applications across to the new location).
My plan was to change the registry, restart my PC, then just drag and drop the apps into the new location on my D: drive. I need to do this because my C: drive doesn't have enough space left to defrag the paging file. Will this method work?
Thanks to everyone who offers an opinion in an advance.
Source: http://www.pctools.com/guides/registry/detail/1137/What impact does changing the Program Files directory have on installed apps in XP?
That tool only changes the default for installing an application. You would need to change all the other registry values for the programs you already have installed.
I would recommend uninstalling the old applications and reinstalling the applications after the change.
How can I change the auto link directory in mail for macintosh.?
I have a mac OSX 10.5.8 and a program called vmware fusion 2.0. Whenever I try to open a link sent in mail (comes with your mac) the link gets directed and opens up in internet explorer of my vmware instead of safari. How can I fix this? this is really annoying. Even if the program is not in use, and removed from my dock it still does this. Help please?How can I change the auto link directory in mail for macintosh.?
Try right click on the file or hold down control n click, then choose get info. Now you'll see opens with option, find the app u want to use, may need to scroll n down go into other. Now check the change all box n that shold do it!pets web hosting domains
Try right click on the file or hold down control n click, then choose get info. Now you'll see opens with option, find the app u want to use, may need to scroll n down go into other. Now check the change all box n that shold do it!
I need help with how to delete old version of windows xp in a parallel install....?
So my A windows xp working... and when it broke down, i paralleled installed and now its B windows xp, which is currently running on.So in the booting up menu.. there r 2 windows xp i can select from ( A cannot boot into, so I use B). Now dumb dad tried to do crazy ****... (fathers day what can i do) and he did another parallel install. so now there is a C windows xp.... so now when i boot.... there are 3 windows xp's to choose from.
A,B,C xp ( A the oldest and the orignal where in c: it is in winnt normally. the default when anyone installs windows)
(B is the one I did, works, i boot into this. i paralled installed by changing directory to like a winnt2)
(C my dad did... i duno wtf is going on, u can boot in... but only recylcing icon.)
Programs from orignal (A) doesnt work on B or C.
Programs I got on B are not A or C
C only has recycling bin.
We have a C: and 4 other drives for each member of family and all files are obtainable in all 3 xp.
how to fix to run 1xp %26amp; keep all data?I need help with how to delete old version of windows xp in a parallel install....?
Hello,
Download EasyBCD and run that. Delete all entries to XP A and XP C and then boot into XP B and delete all XP A and XP C folders and then only use XP B.
Thanks,
Ian
A,B,C xp ( A the oldest and the orignal where in c: it is in winnt normally. the default when anyone installs windows)
(B is the one I did, works, i boot into this. i paralled installed by changing directory to like a winnt2)
(C my dad did... i duno wtf is going on, u can boot in... but only recylcing icon.)
Programs from orignal (A) doesnt work on B or C.
Programs I got on B are not A or C
C only has recycling bin.
We have a C: and 4 other drives for each member of family and all files are obtainable in all 3 xp.
how to fix to run 1xp %26amp; keep all data?I need help with how to delete old version of windows xp in a parallel install....?
Hello,
Download EasyBCD and run that. Delete all entries to XP A and XP C and then boot into XP B and delete all XP A and XP C folders and then only use XP B.
Thanks,
Ian
How do I edit Boot.ini properly?
I installed Windows a non-traditional way, I will explain:
My notebook has no CD/DVD functionality, I had to use a floppy to boot into MS-DOS (the only floppy i had kept failing to write over and over so I had to repair it with flobo about 9 times) So once I finally booted success with A:\ I did fdisk, now my hard drive has two partitions one is 2.5GB and the other is 25GB roughly.
I made partition 1 (2.5GB) active and format it as C: with system files for emergencies (I do not want to use a floppy again, I would rather boot dos from partition 1) then I reboot and removed the floppy.
C: drive booted into DOS from here I had already pre-loaded the WindowsXP files off of my CD onto partition 2 from another machine at an earlier time.
So I ran smartdrv.exe then changed directory to the winxp folder and went into i386 proceeding to run winnt, installing Windows XP to partition 2 (25GB) so I have DOS on partition 1, XP on partition 2. If XP fails I would like DOS to still be bootable, the Boot.ini is on partition 1 (2.5GB)
here is what i did, but this crashes and reboots when I select the DOS option.
[boot loader]
timeout=30
default=multi(0)disk(0)rdisk(0)partiti?br>
[operating systems]
multi(0)disk(0)rdisk(0)partition(1)\=';?/noexecute=optin /fastdetect
multi(0)disk(0)rdisk(0)partition(2)\WI?Windows XP Professional'; /noexecute=optin /fastdetect
This is not working, any ideas? I assume \=DOS means the root of C:\ is where the boot files are, is this incorrect? Thanks!How do I edit Boot.ini properly?
W/o full lines it is tough to tell. This KB from Microsoft will give you a good idea of what it is about
http://support.microsoft.com/kb/289022
My notebook has no CD/DVD functionality, I had to use a floppy to boot into MS-DOS (the only floppy i had kept failing to write over and over so I had to repair it with flobo about 9 times) So once I finally booted success with A:\ I did fdisk, now my hard drive has two partitions one is 2.5GB and the other is 25GB roughly.
I made partition 1 (2.5GB) active and format it as C: with system files for emergencies (I do not want to use a floppy again, I would rather boot dos from partition 1) then I reboot and removed the floppy.
C: drive booted into DOS from here I had already pre-loaded the WindowsXP files off of my CD onto partition 2 from another machine at an earlier time.
So I ran smartdrv.exe then changed directory to the winxp folder and went into i386 proceeding to run winnt, installing Windows XP to partition 2 (25GB) so I have DOS on partition 1, XP on partition 2. If XP fails I would like DOS to still be bootable, the Boot.ini is on partition 1 (2.5GB)
here is what i did, but this crashes and reboots when I select the DOS option.
[boot loader]
timeout=30
default=multi(0)disk(0)rdisk(0)partiti?br>
[operating systems]
multi(0)disk(0)rdisk(0)partition(1)\=';?/noexecute=optin /fastdetect
multi(0)disk(0)rdisk(0)partition(2)\WI?Windows XP Professional'; /noexecute=optin /fastdetect
This is not working, any ideas? I assume \=DOS means the root of C:\ is where the boot files are, is this incorrect? Thanks!How do I edit Boot.ini properly?
W/o full lines it is tough to tell. This KB from Microsoft will give you a good idea of what it is about
http://support.microsoft.com/kb/289022
How can I install software to Ubuntu Linux System from .gz2?
I don't know how to set path and change directories.How can I install software to Ubuntu Linux System from .gz2?
Installing Software in Ubuntu (including tar.gz and tar.bz2 files)
http://www.psychocats.net/ubuntu/install
LUg.How can I install software to Ubuntu Linux System from .gz2?
Why are you even trying to do this? the Ubuntu repositories have everything you need. In fact, whatever it is you're trying to install is probably already there. All you have to do is search the repositories and install it.
Without more information about what you're trying to do, can't help much.
By the way, a gz2 file is just something compressed with gzip.
Are you sure that you don't mean .bz2?
You should only use this method of installing software in ubuntu if it is not available in the repository via synaptic. This way can install files that might conflict with files that you currently have installed and cause numerous stability problems for your whole system. If you start getting all kinds of errors when running other programs after using this method you should remove all those .bz2 files.
Good luck
I think this directory software can be installed on your Ubuntu http://www.abcfastdirectory.com/ thanks
Installing Software in Ubuntu (including tar.gz and tar.bz2 files)
http://www.psychocats.net/ubuntu/install
LUg.How can I install software to Ubuntu Linux System from .gz2?
Why are you even trying to do this? the Ubuntu repositories have everything you need. In fact, whatever it is you're trying to install is probably already there. All you have to do is search the repositories and install it.
Without more information about what you're trying to do, can't help much.
By the way, a gz2 file is just something compressed with gzip.
Are you sure that you don't mean .bz2?
You should only use this method of installing software in ubuntu if it is not available in the repository via synaptic. This way can install files that might conflict with files that you currently have installed and cause numerous stability problems for your whole system. If you start getting all kinds of errors when running other programs after using this method you should remove all those .bz2 files.
Good luck
I think this directory software can be installed on your Ubuntu http://www.abcfastdirectory.com/ thanks
Quick! how do you change your working directory in DOS command prompt? Please!?
quick! how do you change your working directory in DOS command prompt? Please!
need to change it to a particular folder in my directory!
Thanks alotQuick! how do you change your working directory in DOS command prompt? Please!?
cd c:\folder
(cd = change directory, c:\folder is the directory called folder on the c:\ drive)Quick! how do you change your working directory in DOS command prompt? Please!?
Use ';cd'; followed by the name of your directory.
Type ';cd /?'; for more help.
hey there
just type cd\your directory / folder name at the command prompt and same when u want to come back to root just type cd\.
hope this helps
need to change it to a particular folder in my directory!
Thanks alotQuick! how do you change your working directory in DOS command prompt? Please!?
cd c:\folder
(cd = change directory, c:\folder is the directory called folder on the c:\ drive)Quick! how do you change your working directory in DOS command prompt? Please!?
Use ';cd'; followed by the name of your directory.
Type ';cd /?'; for more help.
hey there
just type cd\your directory / folder name at the command prompt and same when u want to come back to root just type cd\.
hope this helps
Changing a directory Name in VB 6?
Does anyone know the code on how to change a Directory name in VB6?Changing a directory Name in VB 6?
use the Name function
Name oldDir As newDirultimate fashion advice more interested
use the Name function
Name oldDir As newDir
How do you change permissions on a directory to 777?
What I have is checked are in owner: read and write--- in ';group';: read---- and ';others';: read.How do you change permissions on a directory to 777?
Mode User Group World
Read Y Y Y
Write Y Y Y
Execute Y Y Y
Perm 7 7 7
As you can see the above table.. you have to check mark all the modes for all three types to give a 777 permission for a directory or file!
If you use FTP, then simplest way is to rightclick the file from FTP Program %26amp; select 'CHMOD' %26amp; put 777...tats it!How do you change permissions on a directory to 777?
chmod 777
with proper permisssions in that directory the command '; chmod 777 filename'; will change the permission.
Mode User Group World
Read Y Y Y
Write Y Y Y
Execute Y Y Y
Perm 7 7 7
As you can see the above table.. you have to check mark all the modes for all three types to give a 777 permission for a directory or file!
If you use FTP, then simplest way is to rightclick the file from FTP Program %26amp; select 'CHMOD' %26amp; put 777...tats it!How do you change permissions on a directory to 777?
chmod 777
with proper permisssions in that directory the command '; chmod 777 filename'; will change the permission.
Active Directory name change?
A user has gotten married and wants her login and email to be her new last name. How can I change this without setting up a new accout?Active Directory name change?
in AD Users %26amp; Computers, just edit the account details.Active Directory name change?
Create an mailbox on the excahnge server with the new address. exmerge mailbox contents from the old address to the new address. Point users account at the new address.
go in AD
Find her name
Right click server blahblah.local or whatever it is
once the name is found
right click change name
Her login will change also and you are going to have to tell her
For email address, add an smtp alias with the new email address.
Make the new address as the primary address so that the all the mails which user send will use the new address.
As we are not deleting the old address, user will be able to receive the mails in her old mail addrss too.
Login and Details, change in Active Directory users and computers.
Cheers!!
Shaba
in AD Users %26amp; Computers, just edit the account details.Active Directory name change?
Create an mailbox on the excahnge server with the new address. exmerge mailbox contents from the old address to the new address. Point users account at the new address.
Report Abuse
go in AD
Find her name
Right click server blahblah.local or whatever it is
once the name is found
right click change name
Her login will change also and you are going to have to tell her
For email address, add an smtp alias with the new email address.
Make the new address as the primary address so that the all the mails which user send will use the new address.
As we are not deleting the old address, user will be able to receive the mails in her old mail addrss too.
Login and Details, change in Active Directory users and computers.
Cheers!!
Shaba
How do I change to the Unit01 directory using a DOS prompt?
on a Lab exercise, this is the first instruction:
1. Open a DOS prompt and change to the Unit01 directory
How do I do this?How do I change to the Unit01 directory using a DOS prompt?
click on ';start'; then Run
type in CMD (if on win2000, XP else type COMMAND)
click okay
in the dos prompt... (assuming your directory is in the root of the c: drive)
type in
c: %26lt;enter%26gt;
cd unit01%26lt;enter%26gt;
dirHow do I change to the Unit01 directory using a DOS prompt?
cd unit01
sirry should have given you full instructions. Start --%26gt; run--%26gt; type cmd. Hte you are in a DSO prompt. They type cd unit01 and you should be in that directory
if you have not been able to change directory yet:
you have to know where the Unit01 directory is. It may or may not be at the root. The directory structure in DOS is a hierarchical tree sturcture. If unit01 is at the root level then ';cd \unit01'; would work. The ';\'; signifies the root. But if the directory is a sub-directory. e.g. it could be under the lessons directory and you would need to say ';cd \lessons\unit01'; to get there.
Well, as it has been said above, you need to know where it is. If you don't, and assuming you are working in a real DOS prompt environment, then you can use ';dir C:\*.* /s/b/p'; to find every file and directory on C: drive. They will scroll to fill the screen, then pause automatically until you hit a key. Once you've found it's location, use ';cd ..'; to move up one directory level at a time until you're at the root level and the prompt shows ';C:\%26gt;'; or something close to that. Then simply type in ';cd C:\[pathtodir]\[diryouneed]'; and it should take you there. I hope this helps you out.
1. Open a DOS prompt and change to the Unit01 directory
How do I do this?How do I change to the Unit01 directory using a DOS prompt?
click on ';start'; then Run
type in CMD (if on win2000, XP else type COMMAND)
click okay
in the dos prompt... (assuming your directory is in the root of the c: drive)
type in
c: %26lt;enter%26gt;
cd unit01%26lt;enter%26gt;
dirHow do I change to the Unit01 directory using a DOS prompt?
cd unit01
sirry should have given you full instructions. Start --%26gt; run--%26gt; type cmd. Hte you are in a DSO prompt. They type cd unit01 and you should be in that directory
if you have not been able to change directory yet:
you have to know where the Unit01 directory is. It may or may not be at the root. The directory structure in DOS is a hierarchical tree sturcture. If unit01 is at the root level then ';cd \unit01'; would work. The ';\'; signifies the root. But if the directory is a sub-directory. e.g. it could be under the lessons directory and you would need to say ';cd \lessons\unit01'; to get there.
Well, as it has been said above, you need to know where it is. If you don't, and assuming you are working in a real DOS prompt environment, then you can use ';dir C:\*.* /s/b/p'; to find every file and directory on C: drive. They will scroll to fill the screen, then pause automatically until you hit a key. Once you've found it's location, use ';cd ..'; to move up one directory level at a time until you're at the root level and the prompt shows ';C:\%26gt;'; or something close to that. Then simply type in ';cd C:\[pathtodir]\[diryouneed]'; and it should take you there. I hope this helps you out.
How to transfer a Joomla website from one computer to another? from one host to another?
My partner and I are developing a Joomla website for a certain project. We are using separate computer and separate hosts (localhosts). My partner has made changes to the graphical design and database structure so I have copied the directories (folders) to my computer. In doing such, I have encountered this error message ';Database Error: Unable to connect to the database:Could not connect to MySQL';. Please help. Thanks :))How to transfer a Joomla website from one computer to another? from one host to another?
You have to copy the database as well. Once you've done that, you have to update configuration.php with the DB info.
An alternative is to use Akeeba Backup. I use it on all my sites - about 3 dozen now. I build a clients site on my host and then transfer over. You can visit them at http://www.akeebabackup.com/ for all the information.How to transfer a Joomla website from one computer to another? from one host to another?
don\'t that
You have to copy the database as well. Once you've done that, you have to update configuration.php with the DB info.
An alternative is to use Akeeba Backup. I use it on all my sites - about 3 dozen now. I build a clients site on my host and then transfer over. You can visit them at http://www.akeebabackup.com/ for all the information.How to transfer a Joomla website from one computer to another? from one host to another?
don\'t that
Change installshield temp directory?
No matter where I install it says I need more space on my C drive, I like to know how to change this because I have plenty of space on D and E. Any clues?Change installshield temp directory?
1st it sounds like you are using 3 hard drives,its ok.
if that is the case,transfer your largest files to your other hard drive.
that will free up space for you.
what you should have done to begin with,is when you download send it to your slave drive and open it there.next you should create a shortcut to your desktop or wherever you want it.
that is how you keep the master drive optimal with a low use of memory and clutter.Change installshield temp directory?
InstallShield should be following the Environment Variable ';TEMP'; to get the temp directory path. To check or edit your TEMP environment Variable:
1) Right click My Computer, select Properties
2) This step will be a little different depending on which version of windows you have. Look for ';Advanced System Settings'; or a tab marked ';Advanced';
3) Click Environment Variables...
4) Change the TEMP environment variables to a location with more space. You may have entries both in the user variable area and in the system variable area.
Set your temp directory - in your environment - to D:\temp (and make the directory on the D drive).
But you still need space on the C drive to install programs - the registry can't be moved, and programs install to the registry (that's what ';install'; means, it's not just copying files).DSL Internet / Router problem whats wrong with my wife
1st it sounds like you are using 3 hard drives,its ok.
if that is the case,transfer your largest files to your other hard drive.
that will free up space for you.
what you should have done to begin with,is when you download send it to your slave drive and open it there.next you should create a shortcut to your desktop or wherever you want it.
that is how you keep the master drive optimal with a low use of memory and clutter.Change installshield temp directory?
InstallShield should be following the Environment Variable ';TEMP'; to get the temp directory path. To check or edit your TEMP environment Variable:
1) Right click My Computer, select Properties
2) This step will be a little different depending on which version of windows you have. Look for ';Advanced System Settings'; or a tab marked ';Advanced';
3) Click Environment Variables...
4) Change the TEMP environment variables to a location with more space. You may have entries both in the user variable area and in the system variable area.
Set your temp directory - in your environment - to D:\temp (and make the directory on the D drive).
But you still need space on the C drive to install programs - the registry can't be moved, and programs install to the registry (that's what ';install'; means, it's not just copying files).
How do I change my root password?
Any Red Hat Fedora expert here?
How do we get to the root directory and change the password?
I forgot the password and the periodic updates keep popping up asking me permission to do it and require my root password. However, I forgot my root password.How do I change my root password?
During normal usage, a Linux OS runs under runlevels between 2 and 5 which corresponds to various multi-user modes. Booting Linux under runlevel 1 will allow one to enter into a specific mode, single user mode. Under such a level, you directly get a root prompt. From there, changing root password is a piece of cake.
Use this short, and easy guide to use GRUB to fix your situation.. Should work just fine!
http://www.debuntu.org/recover-root-passHow do I change my root password?
You'll have to edit /etc/passwd.
Assuming this is YOUR computer or one which you otherwise have legal access to:
You'll need root access to do so. If you boot the computer up using a liveCD (or similar) then you should be able to access if by logging in as root from the liveCD and mounting the partition which contains /etc locally and edit the root password there.
How do we get to the root directory and change the password?
I forgot the password and the periodic updates keep popping up asking me permission to do it and require my root password. However, I forgot my root password.How do I change my root password?
During normal usage, a Linux OS runs under runlevels between 2 and 5 which corresponds to various multi-user modes. Booting Linux under runlevel 1 will allow one to enter into a specific mode, single user mode. Under such a level, you directly get a root prompt. From there, changing root password is a piece of cake.
Use this short, and easy guide to use GRUB to fix your situation.. Should work just fine!
http://www.debuntu.org/recover-root-passHow do I change my root password?
You'll have to edit /etc/passwd.
Assuming this is YOUR computer or one which you otherwise have legal access to:
You'll need root access to do so. If you boot the computer up using a liveCD (or similar) then you should be able to access if by logging in as root from the liveCD and mounting the partition which contains /etc locally and edit the root password there.
How to change setting in active directory?
when I double click a profile it used to open it up, now it goes to black frame. How can I set it to go back to opening the profile without deleting and reinstalling active directory? This is such a pain when I got 100's of change overs to do. Any help is greatly appreciated.How to change setting in active directory?
im afraid there is no shortcut to this and you would have to do it one by one.. good luck!
im afraid there is no shortcut to this and you would have to do it one by one.. good luck!
How can i change local user profile directory locations?
I want to change the profile directory for the user Mike from c:\documents and settings\mike to d:\my documents\user profileHow can i change local user profile directory locations?
In Windows XP:
Open Control Panel
Select User Accounts
Select Change an account
Pick an account to change (';Mike';)
Select Change my name
Overwrite ';Mike'; with ';user profile';
Click Change Name
ta da!
In Windows XP:
Open Control Panel
Select User Accounts
Select Change an account
Pick an account to change (';Mike';)
Select Change my name
Overwrite ';Mike'; with ';user profile';
Click Change Name
ta da!
How do I make A DOS boot partition?
I have a notebook which has no floppy drive, it has no CD drive as it recently burned out. Here is what I would like to do.
Place DOS Boot files on first partition (size 3GB)
Place Win98 Folder (ripped from my 98 disc) into this 3GB Partition
format the rest of the drive to FAT32
I would like to boot into MS-DOS from the 3GB partition, Change directory to Win98 and use Setup.exe to install 98 to the second partition.
This is not happening for some reason, I do not know why. Here is what I have done:
I connect the notebook hard disk to my PC via hard drive adapter,
Downloaded Win98 boot floppy image from bootdisk.com, extracted then mounted the image file and copied all the files onto the 3GB partition. I put the notebook's hard drive back into the notebook and reboot, this should have booted off these files but instead it said hard disk has invalid boot sectors.
I then figured I would use a HEX editor (HXD) and copy the sectors from the floppy boot image to the first partition, after doing so the first partition was decreased in size to the size of a floppy, it contained the boot files and yet, still would not boot.
All of these things should work, but do not. I do not understand, how do i get this to work without floppy or cd?
Please do not say, buy a new *hardware name here* I do not have the money. It would be the best option no doubt, but in these circumstances I must do with what I have.
Please let me know why these sectors are not working and how to make them work. Thanks!!How do I make A DOS boot partition?
You should not have to fiddle around with a Hex editor - that will likely just get you into trouble. The main thing is, to make sure you have a bootable DOS partition and your BIOS directs the computer to boot from that partition. For more information on the boot process, check http://www.storagereview.com/guide2000/r
Chances are, you simply didn't have a bootable DOS partition or the BIOS was not set to boot from that partition. Otherwise your process (copying the boot floppy image) appears to be sound. Another topic to investigate later: Google ';virtual Floppy'; That might not be of use now but could help later. Check
http://www.freewarereview.info/2006-03/v
Another option: borrow a USB stick / thumb drive from a friend, load your boot floppy on the USB stick and boot from that.
Place DOS Boot files on first partition (size 3GB)
Place Win98 Folder (ripped from my 98 disc) into this 3GB Partition
format the rest of the drive to FAT32
I would like to boot into MS-DOS from the 3GB partition, Change directory to Win98 and use Setup.exe to install 98 to the second partition.
This is not happening for some reason, I do not know why. Here is what I have done:
I connect the notebook hard disk to my PC via hard drive adapter,
Downloaded Win98 boot floppy image from bootdisk.com, extracted then mounted the image file and copied all the files onto the 3GB partition. I put the notebook's hard drive back into the notebook and reboot, this should have booted off these files but instead it said hard disk has invalid boot sectors.
I then figured I would use a HEX editor (HXD) and copy the sectors from the floppy boot image to the first partition, after doing so the first partition was decreased in size to the size of a floppy, it contained the boot files and yet, still would not boot.
All of these things should work, but do not. I do not understand, how do i get this to work without floppy or cd?
Please do not say, buy a new *hardware name here* I do not have the money. It would be the best option no doubt, but in these circumstances I must do with what I have.
Please let me know why these sectors are not working and how to make them work. Thanks!!How do I make A DOS boot partition?
You should not have to fiddle around with a Hex editor - that will likely just get you into trouble. The main thing is, to make sure you have a bootable DOS partition and your BIOS directs the computer to boot from that partition. For more information on the boot process, check http://www.storagereview.com/guide2000/r
Chances are, you simply didn't have a bootable DOS partition or the BIOS was not set to boot from that partition. Otherwise your process (copying the boot floppy image) appears to be sound. Another topic to investigate later: Google ';virtual Floppy'; That might not be of use now but could help later. Check
http://www.freewarereview.info/2006-03/v
Another option: borrow a USB stick / thumb drive from a friend, load your boot floppy on the USB stick and boot from that.
Problem executing shell command from PHP script?
I want to execute a shell script which is located at /usr/local/bin/ on my server. This script converts doc files to pdf. Now from the command mode the conversion is happening well. I have to cd (change directory) to that location and then execute the following command:-
hpm_oo2.bin /path/to/input/file/content_238.doc /path/to/output/file/output4.pdf
Even though the command window shows this:-
======================================?br>
23-Dec-2008 05:11:32 net.sf.jooreports.openoffice.connection.?connect
INFO: connected
23-Dec-2008 05:11:32 net.sf.jooreports.openoffice.connection.?disposing
INFO: disconnected
======================================?br>
I get the output pdf file in the path/to/output/file.
Now I want to do the same conversion from PHP code. I wrote the following code:-
======================================?br>
chdir('/usr/local/bin/');
echo ';path';.getcwd().';%26lt;br%26gt;';;
exec(';hpm_oo2.bin /home/vjpsych/domains/vjpsych.ie/public_?/home/vjpsych/domains/vjpsych.ie/public_?
The output shows:-
path/usr/local/bin/ but the conversion is not taking place. How do I make the conversion? What is the error in my code? Please help.Problem executing shell command from PHP script?
Try running the shell scripts on the command-line on your own machine. That may help you catch the errors more quickly.
Other than that advice, I can't help sorry :Scute hair use hair removal cream
hpm_oo2.bin /path/to/input/file/content_238.doc /path/to/output/file/output4.pdf
Even though the command window shows this:-
======================================?br>
23-Dec-2008 05:11:32 net.sf.jooreports.openoffice.connection.?connect
INFO: connected
23-Dec-2008 05:11:32 net.sf.jooreports.openoffice.connection.?disposing
INFO: disconnected
======================================?br>
I get the output pdf file in the path/to/output/file.
Now I want to do the same conversion from PHP code. I wrote the following code:-
======================================?br>
chdir('/usr/local/bin/');
echo ';path';.getcwd().';%26lt;br%26gt;';;
exec(';hpm_oo2.bin /home/vjpsych/domains/vjpsych.ie/public_?/home/vjpsych/domains/vjpsych.ie/public_?
The output shows:-
path/usr/local/bin/ but the conversion is not taking place. How do I make the conversion? What is the error in my code? Please help.Problem executing shell command from PHP script?
Try running the shell scripts on the command-line on your own machine. That may help you catch the errors more quickly.
Other than that advice, I can't help sorry :S
How can i modify my default PDF viewer in regard to browsing internet documents? currently set to acrobat?
ive looked through google and so far the solutions i have read havent been working. currently IE7 is unable to open any PDF documents because acrobat is screwing things up for whatever reason. i want to simply change the pdf viewer to ADOBE READER. i was able to quite easily do this with FIREFOX but IE is a different story.
from what ive gathered, i should be going to Control panel/ folder options/ select pdf/ choose advanced/ choose open/ change directory to READER.exe
when i do that, click OK and close all the dialogs it switches the settings back to opening with ACROBAT.
quite annoying.
any solutions ?How can i modify my default PDF viewer in regard to browsing internet documents? currently set to acrobat?
i'd say uninstall it and get Foxit Reader
google it, it's free and it loads quite fast because of low memory resource that it takesHow can i modify my default PDF viewer in regard to browsing internet documents? currently set to acrobat?
I would recommend changing the registry key for opening PDF files. I've had to do that several times. Click Start %26gt; Run then type in regedit and click OK. Go to HKEY_CLASSES_ROOT %26gt; AcroExch.Document.x (where x is your adobe version) %26gt; Shell. Select the (Default) value, then go to Edit %26gt; Modify and change Open to Read, then click OK.
Now do the same for the value under HKEY_LOCAL_MACHINE %26gt; Software %26gt; Classes %26gt; AcroExch.Document.x (again where x is your adobe version) %26gt; Shell. Change the (Default) value of Open to Read.
Now close the registry editor and restart your computer. (Must restart in order for registry changes to take effect.) You have now changed your default PDF program from Adobe Acrobat to Adobe Reader.
from what ive gathered, i should be going to Control panel/ folder options/ select pdf/ choose advanced/ choose open/ change directory to READER.exe
when i do that, click OK and close all the dialogs it switches the settings back to opening with ACROBAT.
quite annoying.
any solutions ?How can i modify my default PDF viewer in regard to browsing internet documents? currently set to acrobat?
i'd say uninstall it and get Foxit Reader
google it, it's free and it loads quite fast because of low memory resource that it takesHow can i modify my default PDF viewer in regard to browsing internet documents? currently set to acrobat?
I would recommend changing the registry key for opening PDF files. I've had to do that several times. Click Start %26gt; Run then type in regedit and click OK. Go to HKEY_CLASSES_ROOT %26gt; AcroExch.Document.x (where x is your adobe version) %26gt; Shell. Select the (Default) value, then go to Edit %26gt; Modify and change Open to Read, then click OK.
Now do the same for the value under HKEY_LOCAL_MACHINE %26gt; Software %26gt; Classes %26gt; AcroExch.Document.x (again where x is your adobe version) %26gt; Shell. Change the (Default) value of Open to Read.
Now close the registry editor and restart your computer. (Must restart in order for registry changes to take effect.) You have now changed your default PDF program from Adobe Acrobat to Adobe Reader.
How do I change the root password in Linux?
I have an old Linux PC but I forgot the root password.
How do I reset the password?
I tried to go to the root directory. However, when I typed ';su';, it prompted me for the root password. Since I have forgotten it, I cannot type it in and I, therefore, cannot go to the root directory to change the password.How do I change the root password in Linux?
Boot into the system at the physical console. Go into single user mode (check the documentation for your distro).
Make your way to the command prompt. Again consult the specifics for your distro.
Once there you should be able to run ';passwd root'; or similar to reset the password.
The physical console it ultimate power.
NOTE:
Some distros do not have a root account per se (Ubuntu comes to mind). Regular accounts are put in a super user list that are allowed to ';su'; or ';sudo';. In this case the password in question is the password of the account you are already logged in to. If you are allowed to ';go super'; you will temporarily assume ';root'; powers.How do I change the root password in Linux?
At the bootloader, boot into single user mode. You may have to pass init=/bin/bash as well as single in order to bypass the password.
At the prompt:
passwd
you need to log in as root to change the root password, there's no way around it.
If there were every cracker in the world would have a field day.
Your only option is to reinstall the operating system from scratch.
System, Administrator, Users and groups. Click root, then activate, then click root again, click preferences, and change the password.
How do I reset the password?
I tried to go to the root directory. However, when I typed ';su';, it prompted me for the root password. Since I have forgotten it, I cannot type it in and I, therefore, cannot go to the root directory to change the password.How do I change the root password in Linux?
Boot into the system at the physical console. Go into single user mode (check the documentation for your distro).
Make your way to the command prompt. Again consult the specifics for your distro.
Once there you should be able to run ';passwd root'; or similar to reset the password.
The physical console it ultimate power.
NOTE:
Some distros do not have a root account per se (Ubuntu comes to mind). Regular accounts are put in a super user list that are allowed to ';su'; or ';sudo';. In this case the password in question is the password of the account you are already logged in to. If you are allowed to ';go super'; you will temporarily assume ';root'; powers.How do I change the root password in Linux?
At the bootloader, boot into single user mode. You may have to pass init=/bin/bash as well as single in order to bypass the password.
At the prompt:
passwd
you need to log in as root to change the root password, there's no way around it.
If there were every cracker in the world would have a field day.
Your only option is to reinstall the operating system from scratch.
System, Administrator, Users and groups. Click root, then activate, then click root again, click preferences, and change the password.
Using cmd with my other hard drive?
I can't get cmd prompt to change directories to my second hard drive(D:\)
When I type ';CD D:\'; it does nothing, and if I try to run .exe files directly the cmd prompt opens and closes very fast.
How do I fix this?Using cmd with my other hard drive?
DOS or actually the lack of DOS is starting to bite people.
The CMD window is a distant relative of DOS. Therefore most DOS commands work in a CMD window. An old DOS 6.22 or 5.0 command reference is handy or you can work through the windows help system search for MS-DOS. Also simply enter ';help | more'; in a CMD window without the quotes. You can get more detailed help by adding a ';/?'; after a DOS command.
To answer the actual question...
Open a CMD window. It will stay open until you close it.
To change drives enter %26lt;drive letter%26gt;:
or for example:
C:\%26gt;d:%26lt;enter%26gt;
To change directories with long file names and spaces, put quotes around the directory or path.
Shadow Wolf
When I type ';CD D:\'; it does nothing, and if I try to run .exe files directly the cmd prompt opens and closes very fast.
How do I fix this?Using cmd with my other hard drive?
DOS or actually the lack of DOS is starting to bite people.
The CMD window is a distant relative of DOS. Therefore most DOS commands work in a CMD window. An old DOS 6.22 or 5.0 command reference is handy or you can work through the windows help system search for MS-DOS. Also simply enter ';help | more'; in a CMD window without the quotes. You can get more detailed help by adding a ';/?'; after a DOS command.
To answer the actual question...
Open a CMD window. It will stay open until you close it.
To change drives enter %26lt;drive letter%26gt;:
or for example:
C:\%26gt;d:%26lt;enter%26gt;
To change directories with long file names and spaces, put quotes around the directory or path.
Shadow Wolf
How to download this compiler?
Ok so im learning C++ and bought a book called ';C++ without fear'; by brian overland. It came with this compiler and i'm trying to download it, but i'm having trouble. Ok so heres the instructions: Installing the Compiler and Development Environment
======================================?br>
This is a quick overview. For more complete instructions, you
may also want to review the Readme1st.dj file, which is located
on the root directory of the CD. (This is a plain text file
that can be viewed with any text editor.)
To install the compiler and development environment from within
a DOS environment or Windows MS-DOS window:
1. From the root directory of your C drive, create a DJGPP directory:
C:\%26gt;mkdir djgpp
2. Change directory to djgpp.
C:\%26gt;cd djgpp
3. Copy the contents of the root directory of the CD. (This assumes
that your CD uses a D: drive letter; use whatever drive letter is
appropriate.)
C:\DJGPP%26gt;copy d:\*.*
4. Use unzip32.exe to decompress all the binary files.
C:\DJGPP%26gt;unzip32 *.zip
So what do I do? I am currently on the Windows XP. Help?How to download this compiler?
Did you try following the instructions? They seem pretty straight forward...
Anyway, download Code::Blocks instead.How to download this compiler?
I'd check out MinGW or Visual Studio Express.
======================================?br>
This is a quick overview. For more complete instructions, you
may also want to review the Readme1st.dj file, which is located
on the root directory of the CD. (This is a plain text file
that can be viewed with any text editor.)
To install the compiler and development environment from within
a DOS environment or Windows MS-DOS window:
1. From the root directory of your C drive, create a DJGPP directory:
C:\%26gt;mkdir djgpp
2. Change directory to djgpp.
C:\%26gt;cd djgpp
3. Copy the contents of the root directory of the CD. (This assumes
that your CD uses a D: drive letter; use whatever drive letter is
appropriate.)
C:\DJGPP%26gt;copy d:\*.*
4. Use unzip32.exe to decompress all the binary files.
C:\DJGPP%26gt;unzip32 *.zip
So what do I do? I am currently on the Windows XP. Help?How to download this compiler?
Did you try following the instructions? They seem pretty straight forward...
Anyway, download Code::Blocks instead.How to download this compiler?
I'd check out MinGW or Visual Studio Express.
I just bought ';C++ Without Fear,how do i install the disc that came with it?
Well quite frankly the book already sucks because it doesn't
use ';ENGLISH';(not newb friendly at all).I got stuck just installing the disc containing the ';IDE';.And the readme did not help me at all..I did everything it says although it was veryvague and got no results.I will post the readme,can someone please ';translate'; it into SIMPLE WORDS for a newb at this kinda thing.
1. From the root directory of your C drive, create a DJGPP directory:
C:\%26gt;mkdir djgpp
2. Change directory to djgpp.
C:\%26gt;cd djgpp
3. Copy the contents of the root directory of the CD. (This assumes
that your CD uses a D: drive letter; use whatever drive letter is
appropriate.)
C:\DJGPP%26gt;copy d:\*.*
4. Use unzip32.exe to decompress all the binary files.
C:\DJGPP%26gt;unzip32 *.zip
5. Your compiler and development environment should now be installed!
However, you still need to set environment variables, including
PATH, which makes executables available from any directory.I just bought ';C++ Without Fear,how do i install the disc that came with it?
That is your answer.
Bring up a DOS window.
Type in:
C:
cd \ and then type in exactly what it suggests from your #1 above.
You can set the path variables by changing them in the ';System'; application from the ';Control panel';.
You can bring up ';Control Panel';, by typing in ';control'; at the DOS prompt.
Then click on ';System'; which brings up a ';System Properties'; dialog. Click on the ';Advanced'; tab. Then click on the ';Environment variables'; button, and look for ';PATH'; in the ';System Variables'; section of the dialog that is displayed. Then simply double-click on the variable and you're editing it to make the changes after #5.
And no you shouldn't change ';CLASSPATH'; variable.
You can click on ';New'; button in either the ';User variables'; or the ';System variables'; section.
The environment variable name is DJGPP, and the value is the rest of the information you mentioned (which tells it where the path to the compiler is).sides of my fingernails advice around girls
use ';ENGLISH';(not newb friendly at all).I got stuck just installing the disc containing the ';IDE';.And the readme did not help me at all..I did everything it says although it was veryvague and got no results.I will post the readme,can someone please ';translate'; it into SIMPLE WORDS for a newb at this kinda thing.
1. From the root directory of your C drive, create a DJGPP directory:
C:\%26gt;mkdir djgpp
2. Change directory to djgpp.
C:\%26gt;cd djgpp
3. Copy the contents of the root directory of the CD. (This assumes
that your CD uses a D: drive letter; use whatever drive letter is
appropriate.)
C:\DJGPP%26gt;copy d:\*.*
4. Use unzip32.exe to decompress all the binary files.
C:\DJGPP%26gt;unzip32 *.zip
5. Your compiler and development environment should now be installed!
However, you still need to set environment variables, including
PATH, which makes executables available from any directory.I just bought ';C++ Without Fear,how do i install the disc that came with it?
That is your answer.
Bring up a DOS window.
Type in:
C:
cd \ and then type in exactly what it suggests from your #1 above.
You can set the path variables by changing them in the ';System'; application from the ';Control panel';.
You can bring up ';Control Panel';, by typing in ';control'; at the DOS prompt.
Then click on ';System'; which brings up a ';System Properties'; dialog. Click on the ';Advanced'; tab. Then click on the ';Environment variables'; button, and look for ';PATH'; in the ';System Variables'; section of the dialog that is displayed. Then simply double-click on the variable and you're editing it to make the changes after #5.
And no you shouldn't change ';CLASSPATH'; variable.
You can click on ';New'; button in either the ';User variables'; or the ';System variables'; section.
The environment variable name is DJGPP, and the value is the rest of the information you mentioned (which tells it where the path to the compiler is).
How to set default www.my-website.com/index.php?
In my hosting at godaddy free host or other places, how do I set the default address in the browser as http://www.my-website.com/index.php ?
I asked this because whenever you typed www.my-website.com inthe browser, it did not show the ';index.php'; when loading. In consequence, the adsense from google became unprofitable Public Service Ads. But when the browsing forced to load index.php, it shows correct ads.
I tried .htaccess ';DirectoryIndex index.php';, without luck, I tried to change directory index to different file, still no luck, because there was no trail of /indexfile.php at the end of the address.
anybody know how to modified any settings to obtain automatic home address as www.my-website.com/index.php ?
thanksHow to set default www.my-website.com/index.php?
You can use the mod_rewrite functionality if enabled in Apache
in .htaccess
RewriteRule ^/$ http://www.my-website.com/index.php
I asked this because whenever you typed www.my-website.com inthe browser, it did not show the ';index.php'; when loading. In consequence, the adsense from google became unprofitable Public Service Ads. But when the browsing forced to load index.php, it shows correct ads.
I tried .htaccess ';DirectoryIndex index.php';, without luck, I tried to change directory index to different file, still no luck, because there was no trail of /indexfile.php at the end of the address.
anybody know how to modified any settings to obtain automatic home address as www.my-website.com/index.php ?
thanksHow to set default www.my-website.com/index.php?
You can use the mod_rewrite functionality if enabled in Apache
in .htaccess
RewriteRule ^/$ http://www.my-website.com/index.php
Introductory Unix Globbing Help?
Question from Homework:
How would you list all files in the elements directory that either start with the ';c'; character, or end with the ';m'; character, or both. (hint, you may need to use more than one globbing pattern on the same command line)?
I currently have ';ls c* m* c*m'; but this creates duplicates. I'm not sure if that's wrong but if there is a better way I would appreciate it.
2nd Question:
Change directory to /usr/local/lib/glob. Look at the contents of the two directories inside of glob. Without changing directories, how would you list all files in example01 and example02 that DO NOT end in a 5, 6, 7, 8, or 9? What is the minimum number of characters you can use for this command?
Don't even know where to start on this one.
Thanks for the help!Introductory Unix Globbing Help?
Have a look at the following page which describes globs:
http://linux.about.com/od/lts_guide/a/gd
It has some examples including one which you could easily adapt to handle the c* and *m example.
It looks like it includes the part to filter out the 5,6,7,8,9.
How would you list all files in the elements directory that either start with the ';c'; character, or end with the ';m'; character, or both. (hint, you may need to use more than one globbing pattern on the same command line)?
I currently have ';ls c* m* c*m'; but this creates duplicates. I'm not sure if that's wrong but if there is a better way I would appreciate it.
2nd Question:
Change directory to /usr/local/lib/glob. Look at the contents of the two directories inside of glob. Without changing directories, how would you list all files in example01 and example02 that DO NOT end in a 5, 6, 7, 8, or 9? What is the minimum number of characters you can use for this command?
Don't even know where to start on this one.
Thanks for the help!Introductory Unix Globbing Help?
Have a look at the following page which describes globs:
http://linux.about.com/od/lts_guide/a/gd
It has some examples including one which you could easily adapt to handle the c* and *m example.
It looks like it includes the part to filter out the 5,6,7,8,9.
How do I change the directory path to where I save pictures,I dont wanna save pics in my pictures all the time?
When you save the picture it asks you where you want to save them... Unless its a program or something then you wil have to see the owners manual for that individual program, but you might check the programs settings (usually under tools).
How do I change the directory path to where I save pictures,I dont wanna save pics in my pictures all the time?
Start by looking at how you save your pictures. Some camera programs are quite inscrutible with no way to choose a target folder other than reinstalling. If you cannot change the destination when you first save your pictures, use a Search for files named *.jpg and a Windows Explorer pane open to the place you want the pictures to end up. Then practice dragon drop with the mouse.How do I change the directory path to where I save pictures,I dont wanna save pics in my pictures all the time?
When the page pops up to save, there should be a back, forward and a folder with an arrow going up. Push the folder button and keep pushing it if you want to go back. OR you can click on one of the areas in the ';other places'; area.
When the page pops up to save, there should be a back, forward and a folder with an arrow going up. Push the folder button and keep pushing it if you want to go back. OR you can click on one of the areas in the ';other places'; area.
How do I change the directory path to where I save pictures,I dont wanna save pics in my pictures all the time?
Right click on the picture and use ';Save as'; , can then browse to the Drive/Folder of your choice.How do I change the directory path to where I save pictures,I dont wanna save pics in my pictures all the time?
tricky one let me thinkHow do I change the directory path to where I save pictures,I dont wanna save pics in my pictures all the time?
when you try to save a picture you should get a box up asking what you want to name the file and also where you want to save it and in what format.Name for a kitten baby girl names best
tricky one let me thinkHow do I change the directory path to where I save pictures,I dont wanna save pics in my pictures all the time?
when you try to save a picture you should get a box up asking what you want to name the file and also where you want to save it and in what format.
Changing directories in windows?
I currently have a C: and an E: directories, however, I wish to change my E: to D:, but I have no idea on how to do this. Any suggestions will be appreciatedChanging directories in windows?
Actually, these aren't just directories, or you could right click then rename them. These are drive letters. It may be possible to change the drive letter assignment in control panel under device manager, but I'm not sure.
Actually, these aren't just directories, or you could right click then rename them. These are drive letters. It may be possible to change the drive letter assignment in control panel under device manager, but I'm not sure.
How do I change the default for downloading or opening photos from a camera or scanner?
Where is the directory to change the default for opening pictures to edit?How do I change the default for downloading or opening photos from a camera or scanner?
Folder options, open my computer and go to tools at the top, on the file types, select the files and change on the bottom with the opens with button.How do I change the default for downloading or opening photos from a camera or scanner?
the edit screen?
Folder options, open my computer and go to tools at the top, on the file types, select the files and change on the bottom with the opens with button.How do I change the default for downloading or opening photos from a camera or scanner?
the edit screen?
Compling source in cmd?
i am trying to learn java, and i am trying to compile the source file.I save the file here.. ';C:\programfiles\java\HelloWorldapp.java?br>
But when i open the cmd, the directory is ';C:\documents and setiings\owner%26gt;';
how do i change directory from C:\documents and setiings\%26gt; to just ';C:\'; ?
thanksCompling source in cmd?
you can do a bunch of cd..
or cd\Compling source in cmd?
Another way to compile Java source code would be to compile it through an IDE (Integrated Development Environment). Eclipse and IBM Netbeans are two popular free IDEs that are widely used by Java developers.
Eclipse - http://www.eclipse.org/downloads/
Netbeans - http://www.netbeans.org/
But when i open the cmd, the directory is ';C:\documents and setiings\owner%26gt;';
how do i change directory from C:\documents and setiings\%26gt; to just ';C:\'; ?
thanksCompling source in cmd?
you can do a bunch of cd..
or cd\Compling source in cmd?
Another way to compile Java source code would be to compile it through an IDE (Integrated Development Environment). Eclipse and IBM Netbeans are two popular free IDEs that are widely used by Java developers.
Eclipse - http://www.eclipse.org/downloads/
Netbeans - http://www.netbeans.org/
Need some help with a DOS program GW Basic??
Okay, I'll try to be as clear as possible.
I am working from a strictly DOS machine at work to do the company billing.
I export a file from QuickBooks place it on a 3.5 floppy and load it onto my DOS machine by using this command:
copy a:pb0507.csv \qbxfer
I then am suppose to change directories
cd \bprog
then
gwbasic
this loads the program I do my billing with.
I enter the imported file name PB0507.csv
I get path not found respons
Okay so it's not finding the file in the QBXFER directory I'm guessing.
I did c:\dir and I see QBXFER but it doesn't have it as a %26lt;DIR%26gt; like some others are listed.
When I try to run a dir on QBXFER all it says is ';1 file'; and how many bytes it has.
So my question is I want to get this file into QBXFER because the GW Basic program is looking in QBXFER for the file.
Too confusing??? Any Help???
Thanks!Need some help with a DOS program GW Basic??
';copy a:pb0507.csv \qbxfer';
If on your screen was the prompt ';c:\%26gt;';
you just managed to rename the file on your floppy into qbxfer in the root directory of C:
suggestion:
first
del c:\qbxfer
md c:\qbxfer
Now that is done you never do this again.
cd c:\qbxfer (and if your prompt was a:\%26gt; type c: )
Now type
copy a:pb0507.csv
cd \bprog
gwbasicNeed some help with a DOS program GW Basic??
Add the directories containing the file to the PATH statement in Confgsys or Autoexec.bat
I am working from a strictly DOS machine at work to do the company billing.
I export a file from QuickBooks place it on a 3.5 floppy and load it onto my DOS machine by using this command:
copy a:pb0507.csv \qbxfer
I then am suppose to change directories
cd \bprog
then
gwbasic
this loads the program I do my billing with.
I enter the imported file name PB0507.csv
I get path not found respons
Okay so it's not finding the file in the QBXFER directory I'm guessing.
I did c:\dir and I see QBXFER but it doesn't have it as a %26lt;DIR%26gt; like some others are listed.
When I try to run a dir on QBXFER all it says is ';1 file'; and how many bytes it has.
So my question is I want to get this file into QBXFER because the GW Basic program is looking in QBXFER for the file.
Too confusing??? Any Help???
Thanks!Need some help with a DOS program GW Basic??
';copy a:pb0507.csv \qbxfer';
If on your screen was the prompt ';c:\%26gt;';
you just managed to rename the file on your floppy into qbxfer in the root directory of C:
suggestion:
first
del c:\qbxfer
md c:\qbxfer
Now that is done you never do this again.
cd c:\qbxfer (and if your prompt was a:\%26gt; type c: )
Now type
copy a:pb0507.csv
cd \bprog
gwbasicNeed some help with a DOS program GW Basic??
Add the directories containing the file to the PATH statement in Confgsys or Autoexec.bat
Help me with the syntax of this PHP exec() function?
I want to run a shell script from PHP which is at some location on my server. Now first I ran the shell script directly from shell mode. I had to change directory to the location of the shell script. Now using PHP script if I run the following code:
=====================================
%26lt;?
exec('cd ..');
passthru('ls');
?%26gt;
===========================
The output shows the directories in the same directory and not one level up. That means I am not able to change directory using exec('cd ..'); function.
What is the error? How do I change directories. Please help
?%26gt;Help me with the syntax of this PHP exec() function?
You can use the chdir function which is built in
bool chdir ( string directory )
--------------------------------------?br>
chdir('../'); or chdir('target_directory_path');punk hair Fish
=====================================
%26lt;?
exec('cd ..');
passthru('ls');
?%26gt;
===========================
The output shows the directories in the same directory and not one level up. That means I am not able to change directory using exec('cd ..'); function.
What is the error? How do I change directories. Please help
?%26gt;Help me with the syntax of this PHP exec() function?
You can use the chdir function which is built in
bool chdir ( string directory )
--------------------------------------?br>
chdir('../'); or chdir('target_directory_path');
Create RUN RS.bat help?
Hi i would like to know how to create my own .bat file to boot my iPod touch 2g jailbroken from my comp.
i need the .bat to change directory to iRecovery_SVN and than have it type in irecovery -s and than have it type RUN RS
i know its really easy to do this manually but im lazzzyCreate RUN RS.bat help?
1.Open Notepad. Type
@echo off
cd c:\iRecovery_SVN
irecovery -s
RS
cls
*** Where it says cd c:\iRecovery_SVN you will need to put the full path in there, ie say its in Program files then you'll have to type cd c:\Progra~1\iRecovery_SVN etc...
2. Save file AS %26gt;%26gt; All Files %26gt;%26gt; nameoffile.bat
i need the .bat to change directory to iRecovery_SVN and than have it type in irecovery -s and than have it type RUN RS
i know its really easy to do this manually but im lazzzyCreate RUN RS.bat help?
1.Open Notepad. Type
@echo off
cd c:\iRecovery_SVN
irecovery -s
RS
cls
*** Where it says cd c:\iRecovery_SVN you will need to put the full path in there, ie say its in Program files then you'll have to type cd c:\Progra~1\iRecovery_SVN etc...
2. Save file AS %26gt;%26gt; All Files %26gt;%26gt; nameoffile.bat
Linux basic commands. Help!!?
I just started learning linux and im stuck to some questions.
I have already created a directory called 'learning/data' and im in this directory. Now the questions im stuck to is as follows:
1. Copy ur own .bash_profile to learning/data as a file called my_profiles using relative paths.
2. Without changing directory, make a file called rev4.txt in your login directory.
3. Whilst in learning/data make another directory called bin
4. Add this directory to your PATH variable such that it will still be valid when you next login, then force the shell to acknowledge this change for this session.
5. How can you tell that the shell has observed the change?
6. Which cmd will allow u to see the attributes of ur current and parent directory and what is the command u issued?Linux basic commands. Help!!?
So you're doing a course and you havent bothered to read the textbooks or handouts, or you havent bothered to attend the relevant lecture?
do.your.own.homework.!!!!!!
All this information is available via google anyway.
You cnt use google but you reckon you want to use Linux?!Linux basic commands. Help!!?
Hi,
As 16k-zx81 has told u r just trying to get ur work done from someone else ..
But still i ***** resist myself from answering this question. Here u go:
1) assuming u r already in %26lt;usr_root%26gt;/learning/data -
------ cp ../../.bash_profile .
2) again assuming ur login directory is %26lt;usr_root%26gt;
------ touch ../../rev4.txt
3) md bin
4) ok this 1 is a bit tricky .. actually its been more than 2 yrs since i have seen a unix/linux screen itself .. but still lemme try
------ vi ../../.kshrc (or it cud b .bshrc based on the flavor of linux u r using) -%26gt; then find the PATH attribute and append this directory path there. Save and exit out of vi.
------ . ../../.bash_profile [this will force ur shell to again reset env but this time it will refer to ur modified .kshrc]
5) I didn't exactly get ur question but still my guess for an answer is:
------ echo $PATH
6) ls -lrt (for current dir)
ls -lrt ../ (for parent dir)
Regards,
Narahari
I have already created a directory called 'learning/data' and im in this directory. Now the questions im stuck to is as follows:
1. Copy ur own .bash_profile to learning/data as a file called my_profiles using relative paths.
2. Without changing directory, make a file called rev4.txt in your login directory.
3. Whilst in learning/data make another directory called bin
4. Add this directory to your PATH variable such that it will still be valid when you next login, then force the shell to acknowledge this change for this session.
5. How can you tell that the shell has observed the change?
6. Which cmd will allow u to see the attributes of ur current and parent directory and what is the command u issued?Linux basic commands. Help!!?
So you're doing a course and you havent bothered to read the textbooks or handouts, or you havent bothered to attend the relevant lecture?
do.your.own.homework.!!!!!!
All this information is available via google anyway.
You cnt use google but you reckon you want to use Linux?!Linux basic commands. Help!!?
Hi,
As 16k-zx81 has told u r just trying to get ur work done from someone else ..
But still i ***** resist myself from answering this question. Here u go:
1) assuming u r already in %26lt;usr_root%26gt;/learning/data -
------ cp ../../.bash_profile .
2) again assuming ur login directory is %26lt;usr_root%26gt;
------ touch ../../rev4.txt
3) md bin
4) ok this 1 is a bit tricky .. actually its been more than 2 yrs since i have seen a unix/linux screen itself .. but still lemme try
------ vi ../../.kshrc (or it cud b .bshrc based on the flavor of linux u r using) -%26gt; then find the PATH attribute and append this directory path there. Save and exit out of vi.
------ . ../../.bash_profile [this will force ur shell to again reset env but this time it will refer to ur modified .kshrc]
5) I didn't exactly get ur question but still my guess for an answer is:
------ echo $PATH
6) ls -lrt (for current dir)
ls -lrt ../ (for parent dir)
Regards,
Narahari
Ubuntu, Apache, Secure FTP (SFTP) and Dreamweaver. HELP?
I am installing Ubuntu Server 7.04 in a virtual machine on my PC.
I want to setup Dreamweaver on my PC to access the Ubuntu Server via Secure FTP and see the files in \var\www\myfolder
I'm not sure how to setup Secure FTP, I've installed vsftpd but am unsure if it supports SSL. Do I need OpenSSL and vsftpd? if so how do I set them up to work with Dreamweaver?
At the moment I have vsftpd installed and can access a test page I made (\var\www\myfolder\index.html) from the browser on my PC but I cannot setup Dreamweaver to connect to the FTP server and access 'myfolder' I can get it to connect and access the users home directory which I have created a symbolic link to \var\www\myfolder but I can't open that folder (Error: 550 failed to change directory) and it's not using Secure FTP.Ubuntu, Apache, Secure FTP (SFTP) and Dreamweaver. HELP?
It sounds like you are on the right track.
I want to setup Dreamweaver on my PC to access the Ubuntu Server via Secure FTP and see the files in \var\www\myfolder
I'm not sure how to setup Secure FTP, I've installed vsftpd but am unsure if it supports SSL. Do I need OpenSSL and vsftpd? if so how do I set them up to work with Dreamweaver?
At the moment I have vsftpd installed and can access a test page I made (\var\www\myfolder\index.html) from the browser on my PC but I cannot setup Dreamweaver to connect to the FTP server and access 'myfolder' I can get it to connect and access the users home directory which I have created a symbolic link to \var\www\myfolder but I can't open that folder (Error: 550 failed to change directory) and it's not using Secure FTP.Ubuntu, Apache, Secure FTP (SFTP) and Dreamweaver. HELP?
It sounds like you are on the right track.
Saturday, November 20, 2010
How do you change the default directory from C:/ to D:/ for storage of docs in windows xp?
Press start.
Right click on the 'My Documents' link. then hit 'Properties'
On the front page there is the 'Target' for the file... Change that and its done....How do you change the default directory from C:/ to D:/ for storage of docs in windows xp?
hey dude....like the hat............thanx for the 2 points...How do you change the default directory from C:/ to D:/ for storage of docs in windows xp?
Start - My Documents - Right Click to get properties - Type the Directory then click apply.
Right click on the 'My Documents' link. then hit 'Properties'
On the front page there is the 'Target' for the file... Change that and its done....How do you change the default directory from C:/ to D:/ for storage of docs in windows xp?
hey dude....like the hat............thanx for the 2 points...How do you change the default directory from C:/ to D:/ for storage of docs in windows xp?
Start - My Documents - Right Click to get properties - Type the Directory then click apply.
Unix Systems homework help?
Hi, I need some help with the follow questions. Any help would be great!
1. In your login directory, make a directory called week4/revision
2. Without changing directories, make another directory week4_revision/data
3. Change to week4_revision/data in one command
4. Copy your own .bash_profile to week4_revision/data as a file called my_profiles using relative paths. [Remember you are now in /student/sxxxxx/week_revistion/data]
5. Copy the password file from /etc to week4_revision/data using absolute paths
6. Without changing directory, make a file called rev4.txt in your login directory. [Remember you are now in /student/sxxxxx/week_revision/data]
7. Whilist in week4_revision/data make another directory called bin
8. Add this directory to your PATH variable such that is will still be valid when you next login, then force shell to acknowledge this change for this session
9. How can you tell that the shell has observed the change?
10. Which command will allow you to see the attributes of your current and parent directory and what is the command you issued?
11. Apart from vi, which other commands (there are at least 2) will allow you to see the contents of .bash_profile
12. How many ways can you think of to return to your login directory? What are they?
13. Return to your home directory using the most efficient command
14. Which command will remove the directory week4_revision (do not remove it though) ? [There are still files in this directory].
15. Change week4_revision to week4_revision.old
16. Will this affect your path statement? If so, how?
17. Which meta characters are valid with the ls command?
18. What does ls -alt do?
19. Which command will make four directories da db dc dd in one command?
20. Which command will remove only the three directories da db dc in one command but only using one argument?
Thanks for your help, I have a test coming up and I am behind so the answers will help me study.Unix Systems homework help?
1. In your login directory, make a directory called week4/revision
mkdir -p week4/revision
2. Without changing directories, make another directory week4_revision/data
mkdir -p week4_revision/data
3. Change to week4_revision/data in one command
cd week4_revision/data
4. Copy your own .bash_profile to week4_revision/data as a file called my_profiles using relative paths. [Remember you are now in /student/sxxxxx/week_revistion/data]
cp ../../.bash_profile my_profiles
5. Copy the password file from /etc to week4_revision/data using absolute paths
cp /etc/passwd /student/sxxxxx/week4_revision/data
6. Without changing directory, make a file called rev4.txt in your login directory. [Remember you are now in /student/sxxxxx/week_revision/data]
touch ../../rev4.txt
7. Whilist in week4_revision/data make another directory called bin
mkdir bin
8. Add this directory to your PATH variable such that is will still be valid when you next login, then force shell to acknowledge this change for this session
echo ';export PATH=/student/sxxxxx/week4_revision/data?%26gt;%26gt; ~/.bash_profile
source ~/.bash_profile
9. How can you tell that the shell has observed the change?
echo $PATH
10. Which command will allow you to see the attributes of your current and parent directory and what is the command you issued?
11. Apart from vi, which other commands (there are at least 2) will allow you to see the contents of .bash_profile
cat ~/.bash_profile
pico ~/.bash_profile
12. How many ways can you think of to return to your login directory? What are they?
cd
cd ~
cd $HOME
13. Return to your home directory using the most efficient command
cd
14. Which command will remove the directory week4_revision (do not remove it though) ? [There are still files in this directory].
rm -rf week4_revision
15. Change week4_revision to week4_revision.old
mv week4_revision/ week4_revision.old/
16. Will this affect your path statement? If so, how?
No, but the path to renamed directory will become invalid.
17. Which meta characters are valid with the ls command?
*
?
~
18. What does ls -alt do?
a; list hidden files and directories
l; long listing in an 8 column format
t; list files in the order of their modification dates
19. Which command will make four directories da db dc dd in one command?
mkdir da db dc dd
mkdir -p da/db/dc/dd
20. Which command will remove only the three directories da db dc in one command but only using one argument?
rm -rf d[a-c]Unix Systems homework help?
Wow. You better get busy if you're behind.
You're kidding with these questions, right? Someone in the first day of a Unix class could answer all of these. If you can't, you need to drop the class now.
Why are you in that class if you can't even answer these questions? I think it's time you re-evaluate your goals and direction for your education!
Good luck in dropping your class and signing up for ';basket-weaving 101';, because it's rather late in the season to drop a class, but who knows - maybe they might make an exception for you this one time.iis web server clipping nails dry
1. In your login directory, make a directory called week4/revision
2. Without changing directories, make another directory week4_revision/data
3. Change to week4_revision/data in one command
4. Copy your own .bash_profile to week4_revision/data as a file called my_profiles using relative paths. [Remember you are now in /student/sxxxxx/week_revistion/data]
5. Copy the password file from /etc to week4_revision/data using absolute paths
6. Without changing directory, make a file called rev4.txt in your login directory. [Remember you are now in /student/sxxxxx/week_revision/data]
7. Whilist in week4_revision/data make another directory called bin
8. Add this directory to your PATH variable such that is will still be valid when you next login, then force shell to acknowledge this change for this session
9. How can you tell that the shell has observed the change?
10. Which command will allow you to see the attributes of your current and parent directory and what is the command you issued?
11. Apart from vi, which other commands (there are at least 2) will allow you to see the contents of .bash_profile
12. How many ways can you think of to return to your login directory? What are they?
13. Return to your home directory using the most efficient command
14. Which command will remove the directory week4_revision (do not remove it though) ? [There are still files in this directory].
15. Change week4_revision to week4_revision.old
16. Will this affect your path statement? If so, how?
17. Which meta characters are valid with the ls command?
18. What does ls -alt do?
19. Which command will make four directories da db dc dd in one command?
20. Which command will remove only the three directories da db dc in one command but only using one argument?
Thanks for your help, I have a test coming up and I am behind so the answers will help me study.Unix Systems homework help?
1. In your login directory, make a directory called week4/revision
mkdir -p week4/revision
2. Without changing directories, make another directory week4_revision/data
mkdir -p week4_revision/data
3. Change to week4_revision/data in one command
cd week4_revision/data
4. Copy your own .bash_profile to week4_revision/data as a file called my_profiles using relative paths. [Remember you are now in /student/sxxxxx/week_revistion/data]
cp ../../.bash_profile my_profiles
5. Copy the password file from /etc to week4_revision/data using absolute paths
cp /etc/passwd /student/sxxxxx/week4_revision/data
6. Without changing directory, make a file called rev4.txt in your login directory. [Remember you are now in /student/sxxxxx/week_revision/data]
touch ../../rev4.txt
7. Whilist in week4_revision/data make another directory called bin
mkdir bin
8. Add this directory to your PATH variable such that is will still be valid when you next login, then force shell to acknowledge this change for this session
echo ';export PATH=/student/sxxxxx/week4_revision/data?%26gt;%26gt; ~/.bash_profile
source ~/.bash_profile
9. How can you tell that the shell has observed the change?
echo $PATH
10. Which command will allow you to see the attributes of your current and parent directory and what is the command you issued?
11. Apart from vi, which other commands (there are at least 2) will allow you to see the contents of .bash_profile
cat ~/.bash_profile
pico ~/.bash_profile
12. How many ways can you think of to return to your login directory? What are they?
cd
cd ~
cd $HOME
13. Return to your home directory using the most efficient command
cd
14. Which command will remove the directory week4_revision (do not remove it though) ? [There are still files in this directory].
rm -rf week4_revision
15. Change week4_revision to week4_revision.old
mv week4_revision/ week4_revision.old/
16. Will this affect your path statement? If so, how?
No, but the path to renamed directory will become invalid.
17. Which meta characters are valid with the ls command?
*
?
~
18. What does ls -alt do?
a; list hidden files and directories
l; long listing in an 8 column format
t; list files in the order of their modification dates
19. Which command will make four directories da db dc dd in one command?
mkdir da db dc dd
mkdir -p da/db/dc/dd
20. Which command will remove only the three directories da db dc in one command but only using one argument?
rm -rf d[a-c]Unix Systems homework help?
Wow. You better get busy if you're behind.
You're kidding with these questions, right? Someone in the first day of a Unix class could answer all of these. If you can't, you need to drop the class now.
Why are you in that class if you can't even answer these questions? I think it's time you re-evaluate your goals and direction for your education!
Good luck in dropping your class and signing up for ';basket-weaving 101';, because it's rather late in the season to drop a class, but who knows - maybe they might make an exception for you this one time.
How do i change my current directory to a differant directory? i have vista?
If you are talking about changing directories when using the command line, the command is 'cd'
cd .. will take you to a parent directory.
cd path_to_directory will take you where you want to go.
When typing the path it can be relative to your current directory such as
';cd ..\other_dir_in_parent_DIR'; or it can be complete like
';c:\dir1\dir2\dest';
To list the files and directories in your current directory, use the ';dir'; command.
If you are not talking about using the command prompt, then I am not sure what you are asking. In Windows, directories are represented by icons of folders. Double click on a folder and you will see the contents of that directory. Click on a folder in that directory, and that window will change directories to that folder's location.
cd .. will take you to a parent directory.
cd path_to_directory will take you where you want to go.
When typing the path it can be relative to your current directory such as
';cd ..\other_dir_in_parent_DIR'; or it can be complete like
';c:\dir1\dir2\dest';
To list the files and directories in your current directory, use the ';dir'; command.
If you are not talking about using the command prompt, then I am not sure what you are asking. In Windows, directories are represented by icons of folders. Double click on a folder and you will see the contents of that directory. Click on a folder in that directory, and that window will change directories to that folder's location.
In Unix, how do you change your root directory to a different drive?
run the ';df'; command to get a listing of mounted filesystems and use the ';cd'; command to get to them. For example, if another drive is mounted as /export, the ';cd'; command you run is ';cd /export.';In Unix, how do you change your root directory to a different drive?
You have to unmount the device mapped to root first - which means you need to be able to logout of all local user accounts first and basically shutdown the kernel. You need to then boot the machine from a different physical drive than the one you want to remap (a live cd/dvd would be ideal) so that none of the root filesystem is locked (part of it is always locked due to dev, proc and so on which are pseudo filesystems generated by the active kernel).
It's then a matter of creating a new root filesystem or copying the current one onto a different physical drive's filesystem and setting up the local machine to mount that device to /
The only thing you will have to take care of doing is to make sure you remount any other partitions you have to the same mount points. You'll have to update some configuration files, too but I don't know which ones you'd need for unix.
You have to unmount the device mapped to root first - which means you need to be able to logout of all local user accounts first and basically shutdown the kernel. You need to then boot the machine from a different physical drive than the one you want to remap (a live cd/dvd would be ideal) so that none of the root filesystem is locked (part of it is always locked due to dev, proc and so on which are pseudo filesystems generated by the active kernel).
It's then a matter of creating a new root filesystem or copying the current one onto a different physical drive's filesystem and setting up the local machine to mount that device to /
The only thing you will have to take care of doing is to make sure you remount any other partitions you have to the same mount points. You'll have to update some configuration files, too but I don't know which ones you'd need for unix.
How do I change a cmd directory?
From ';C:\........'; to ';D:\........'; ?How do I change a cmd directory?
Just type D:
and press Enter.
And then:
cd d:\...
Just type D:
and press Enter.
And then:
cd d:\...
How to change the users directory on Windows 2000?
How can I change the default location where users are stored. Right now it's on my D:/ hard drive, but I want it on my G:/ hard drive.How to change the users directory on Windows 2000?
Do you want to make the default location to save files? That is, whenever you press ';Save'; button, you want to get the location by default? If so, check the following site...
http://techpatterns.com/forums/about257.
Do you want to make the default location to save files? That is, whenever you press ';Save'; button, you want to get the location by default? If so, check the following site...
http://techpatterns.com/forums/about257.
How can I change the Default Directory on the Windows XP Command Prompt?
Want to change from C:\Documents and Settings\Mark
to
C:\JavaPrograms.How can I change the Default Directory on the Windows XP Command Prompt?
You cant. They have already been set up according to your Windows Login name. I dont think it will let you change it. I dont even think you SHOULD change it because the layout of Document and Settings is set in such a way that some programs rely on that path to install certain files.
Youre going to regret it later on and you will wish you didnt do that.
I would just create a separate JavaPrograms folder and you can just copy things in there instead.How can I change the Default Directory on the Windows XP Command Prompt?
START%26gt;%26gt;PROGRAMS%26gt;%26gt;ACCESSORIES%26gt;%26gt;RIGHT-CLIC?on COMMAND PROMPT%26gt;%26gt;CHAANGE the START IN VALUES.
Now, you cant use run then cmd, you would have to use that same icon from the start menu from now on to get to that location.
CHECK THIS LINK An A-Z Index of the Windows NT/XP command line %26gt; http://www.ss64.com/nt/
There are many ways to do that with out even changing the registry.
1. Go into your windows\system32 directory, copy ';CMD.EXE'; to C:\JavaPrograms. When you want to work with java, just go into
C:\JavaPrograms and run cmd.exe, you will see the prompt runs's in it's root directory unlesss you change the exe's properties.
2. Change cmd.exe run settings. go into your windows\system32 directory. Right click CMD.EXE and select COPY. Goto your desktop or wherever you want to access the shortcut and right click and ';Paste Shortcut';. Right Click on your New Shortcut and select PROPERTIES. Click the SHORTCUT tab, edit the START IN field to C:\JavaPrograms now everytime you open the shortcut it will start there.
Alternativly you can Download shelltoys XP, and it will alow you to open command promt from any directory. simply by right clicking in/on the folder and selecting COMMAND PROMPT.
http://www.shelltoysxp.com/horses can i help you
to
C:\JavaPrograms.How can I change the Default Directory on the Windows XP Command Prompt?
You cant. They have already been set up according to your Windows Login name. I dont think it will let you change it. I dont even think you SHOULD change it because the layout of Document and Settings is set in such a way that some programs rely on that path to install certain files.
Youre going to regret it later on and you will wish you didnt do that.
I would just create a separate JavaPrograms folder and you can just copy things in there instead.How can I change the Default Directory on the Windows XP Command Prompt?
START%26gt;%26gt;PROGRAMS%26gt;%26gt;ACCESSORIES%26gt;%26gt;RIGHT-CLIC?on COMMAND PROMPT%26gt;%26gt;CHAANGE the START IN VALUES.
Now, you cant use run then cmd, you would have to use that same icon from the start menu from now on to get to that location.
CHECK THIS LINK An A-Z Index of the Windows NT/XP command line %26gt; http://www.ss64.com/nt/
There are many ways to do that with out even changing the registry.
1. Go into your windows\system32 directory, copy ';CMD.EXE'; to C:\JavaPrograms. When you want to work with java, just go into
C:\JavaPrograms and run cmd.exe, you will see the prompt runs's in it's root directory unlesss you change the exe's properties.
2. Change cmd.exe run settings. go into your windows\system32 directory. Right click CMD.EXE and select COPY. Goto your desktop or wherever you want to access the shortcut and right click and ';Paste Shortcut';. Right Click on your New Shortcut and select PROPERTIES. Click the SHORTCUT tab, edit the START IN field to C:\JavaPrograms now everytime you open the shortcut it will start there.
Alternativly you can Download shelltoys XP, and it will alow you to open command promt from any directory. simply by right clicking in/on the folder and selecting COMMAND PROMPT.
http://www.shelltoysxp.com/
How to write a bash shell with redirections, change in directories, etc?
I alredy have the second part. But I cannot get the first part when I parse the files and use a for loop.
My teacher gave me this example but I need the English Version: for(i=0; i%26lt;strlen(command); i++){
What is this. What does this mean?How to write a bash shell with redirections, change in directories, etc?
this loop is going to find the string length of all the commands in the loop
So, in the batch script
cls
net user /domain %username%
It's going to return a bunch of numbers totaling the characters in the command.
ex
3
27
It is quite usless, but it gives ideas on what to do next... you could build off of it....
My teacher gave me this example but I need the English Version: for(i=0; i%26lt;strlen(command); i++){
What is this. What does this mean?How to write a bash shell with redirections, change in directories, etc?
this loop is going to find the string length of all the commands in the loop
So, in the batch script
cls
net user /domain %username%
It's going to return a bunch of numbers totaling the characters in the command.
ex
3
27
It is quite usless, but it gives ideas on what to do next... you could build off of it....
How do you change the default directory of ms-dos?
I want that every time I open command prompt, instead of C:\%26gt;,
C:\Documents and Settings\User%26gt; appears.
I don't like using ';cd'; every time just to change the current directory.How do you change the default directory of ms-dos?
Go to the properties of the link and look at the shortcut info. Change the ';Start In'; to %USERPROFILE%.How do you change the default directory of ms-dos?
* Click Start, Run and type Regedit.exe
* Navigate to the following branch:
HKEY_CURRENT_USER \ Software \ Microsoft \ Command Processor
* In the right-pane, double-click Autorun and set the startup folder path as its data, preceded by a CD\. If Autorun is missing, create a new REG_SZ (String Value) in the above location.
Right click on ';Command Prompt';, choose ';Properties';, and change the listing for ';Start in'; to:
C:\
Click ';OK';, and you are in business! From now on every time you select Command Prompt, you will start in the root directory, C:
The easiest way:
1) Create a shortcut to cmd.exe (in the Windows/system32 or WINNT/system32 directory.
2) Right click on the shortcut and select Properties.
3) Under ';Start In'; put c:\
4) Click ';OK';
Now when you click on the shortcut you'll start in C:\
C:\Documents and Settings\User%26gt; appears.
I don't like using ';cd'; every time just to change the current directory.How do you change the default directory of ms-dos?
Go to the properties of the link and look at the shortcut info. Change the ';Start In'; to %USERPROFILE%.How do you change the default directory of ms-dos?
* Click Start, Run and type Regedit.exe
* Navigate to the following branch:
HKEY_CURRENT_USER \ Software \ Microsoft \ Command Processor
* In the right-pane, double-click Autorun and set the startup folder path as its data, preceded by a CD\. If Autorun is missing, create a new REG_SZ (String Value) in the above location.
Right click on ';Command Prompt';, choose ';Properties';, and change the listing for ';Start in'; to:
C:\
Click ';OK';, and you are in business! From now on every time you select Command Prompt, you will start in the root directory, C:
The easiest way:
1) Create a shortcut to cmd.exe (in the Windows/system32 or WINNT/system32 directory.
2) Right click on the shortcut and select Properties.
3) Under ';Start In'; put c:\
4) Click ';OK';
Now when you click on the shortcut you'll start in C:\
How to change location of 'My documents' to other hard drive.?
I want all of the system folder my documents to work on my second internal hard drive, how can I change the directory?How to change location of 'My documents' to other hard drive.?
Here you go
http://www.kellys-korner-xp.com/win_xp_m
///How to change location of 'My documents' to other hard drive.?
READ THE WHOLE ARTICLE TO GO
You should be able to move the ';target'; of your ';My Documents'; folder on each machine. ';My Documents'; is actually a redirection that is done within the Windows Explorer shell, and is easy to reassign on the face of it. I have not tried this on a network drive, so there are no guarantees. I have successfully reassigned My Documents to what is (to me) a more accessible directory on my hard drive. Here's what you can do:
1) Set up your network and your network drive. Make sure that it is assigned a particular letter for each machine. (Assign permanent drive letters under Control Panel --%26gt; Administrative Tools --%26gt; Computer Management --%26gt; Disk Management. This should work for network drives as well. Someone correct me if I'm wrong; again, I haven't done this before.
2) On your computers, open Windows Explorer. From My Computer, right-click on My Documents and select properties. The first thing that pops up is a ';target folder location'; screen. Select ';move'; and pick the desired folder on your networked drive (i.e., computer 1's documents, computer 2's documents, etc.). You may have to physically copy everything over, but then it will be on the networked drive and everything should work smoothly. That is, in the future, Windows will go to the target location whenever you look in ';My Documents';
It is possible that you can even do #2 without bothering with #1. You may wish to try. If so, make sure you assign a specific name/letter to your network drive that is somewhere down the line (H or so) so that Windows won't get confused if you are using USB drives or flash cards on occasion.
As always, back up first.
There is a another way to do this.
Download Microsoft's Tweak UI from http://www.microsoft.com/windowsxp/downl
Under My Computer -%26gt; Special Folders
And the tool can be used for changing other things too.
Use Tweak UI
If you are trying to move the entire My Documents folder, then there is a simple and very easy way to do it.
Either on the desktop or start menu depending on how your windows is setup right click on your ';My Documents'; go to properties.. There will be a tab there that says target in that it will say ';Target Folder Location'; and list something like C:\Documents and Settings\%user-name%\My Documents under that click ';Move';, pick the location you want your My Documents to be click OK, a pop up will ask you if you want to move all of the documents from the old location to your new location. Say YES.
Then you are done.
If you want to move any other system folder then it was be easiest to use Tweak UI but for the My Docs this way is quick and easy and it works...
well! you can ofcourse change location by modifying registry
or find software form net using google.. my create proble later on
the ideal thing should be
- create a folder wherever you wish
- create shortcut on desktop and mydocument for that folder
- it will be easily available e'time when you need.
- same you can keep in quick launch.
so you will have your folder accessible from everywhere.
Here you go
http://www.kellys-korner-xp.com/win_xp_m
///How to change location of 'My documents' to other hard drive.?
READ THE WHOLE ARTICLE TO GO
You should be able to move the ';target'; of your ';My Documents'; folder on each machine. ';My Documents'; is actually a redirection that is done within the Windows Explorer shell, and is easy to reassign on the face of it. I have not tried this on a network drive, so there are no guarantees. I have successfully reassigned My Documents to what is (to me) a more accessible directory on my hard drive. Here's what you can do:
1) Set up your network and your network drive. Make sure that it is assigned a particular letter for each machine. (Assign permanent drive letters under Control Panel --%26gt; Administrative Tools --%26gt; Computer Management --%26gt; Disk Management. This should work for network drives as well. Someone correct me if I'm wrong; again, I haven't done this before.
2) On your computers, open Windows Explorer. From My Computer, right-click on My Documents and select properties. The first thing that pops up is a ';target folder location'; screen. Select ';move'; and pick the desired folder on your networked drive (i.e., computer 1's documents, computer 2's documents, etc.). You may have to physically copy everything over, but then it will be on the networked drive and everything should work smoothly. That is, in the future, Windows will go to the target location whenever you look in ';My Documents';
It is possible that you can even do #2 without bothering with #1. You may wish to try. If so, make sure you assign a specific name/letter to your network drive that is somewhere down the line (H or so) so that Windows won't get confused if you are using USB drives or flash cards on occasion.
As always, back up first.
There is a another way to do this.
Download Microsoft's Tweak UI from http://www.microsoft.com/windowsxp/downl
Under My Computer -%26gt; Special Folders
And the tool can be used for changing other things too.
Use Tweak UI
If you are trying to move the entire My Documents folder, then there is a simple and very easy way to do it.
Either on the desktop or start menu depending on how your windows is setup right click on your ';My Documents'; go to properties.. There will be a tab there that says target in that it will say ';Target Folder Location'; and list something like C:\Documents and Settings\%user-name%\My Documents under that click ';Move';, pick the location you want your My Documents to be click OK, a pop up will ask you if you want to move all of the documents from the old location to your new location. Say YES.
Then you are done.
If you want to move any other system folder then it was be easiest to use Tweak UI but for the My Docs this way is quick and easy and it works...
well! you can ofcourse change location by modifying registry
or find software form net using google.. my create proble later on
the ideal thing should be
- create a folder wherever you wish
- create shortcut on desktop and mydocument for that folder
- it will be easily available e'time when you need.
- same you can keep in quick launch.
so you will have your folder accessible from everywhere.
How to Change the root directory of a CD?
In a yahoo answers question about getting the NXE the answerer states that the .XEX should be on the root directory of the CD. How do you do this?
Here is a link: http://answers.yahoo.com/question/index?
It is on the 5th dash.How to Change the root directory of a CD?
When you first open up a cd drive to view contents, that is the root directory.
What he is means is to not install the programs within a folder in the cd.
See from the rest of the 5th dash of that answer: ... Do NOT... put them in a folder on the disc. Some burning programs will put the files into a folder and then the 360 will not read it ...
Here is a link: http://answers.yahoo.com/question/index?
It is on the 5th dash.How to Change the root directory of a CD?
When you first open up a cd drive to view contents, that is the root directory.
What he is means is to not install the programs within a folder in the cd.
See from the rest of the 5th dash of that answer: ... Do NOT... put them in a folder on the disc. Some burning programs will put the files into a folder and then the 360 will not read it ...
How to change windows boot directory?
I had a copy of Win98se on a computer, I installed another version of it in a new directory on the same hard drive for some troubleshooting issues. I would like to switch back to the original directory, but I can't seem to find out how anywhere. can someone tell me how to tell windows to boot from c:\windows rather than c:\newdows?How to change windows boot directory?
IF you did a simple INSTALL when you installed to c:\newdows then you need to do a simple INSTALL again over the original directory. If you installed a dual boot, then you would see the boot menu at startup.
Good luck and Happy Computing!How to change windows boot directory?
u gonna have to erase the new windows and boot from the old windows you had, that wasn't very clever after all
Start-------Run-------and type : msconfig --------- now in the fourth tab called BOOT INI you can change it ;)
restart, hit the correct f key....it varies on each machine...expect it to take a while. You have to get into the net bios setting to change the boot sequence, its pretty obvious though once you are in it.
I had to replace win98 on four office machines......had to upgrade to windows xp pro....you can get the update for 199, or the complete bootable disk for 299......your problems will be solved if you completely blow out the operating system.
I then, two weeks ago had to replace the office main, wndows 2000 server......to windows xp pro....it is so much happier!
When you installed the second copy, you re-wrote the master boot record of the disk. You can't modify that. You will have to do a new install to C:\windows. Later versions of windows (2000 and XP) simply mark the MBR to point to an initialising file and this allows for modification.name spelling in What is a good bed sheets to use
IF you did a simple INSTALL when you installed to c:\newdows then you need to do a simple INSTALL again over the original directory. If you installed a dual boot, then you would see the boot menu at startup.
Good luck and Happy Computing!How to change windows boot directory?
u gonna have to erase the new windows and boot from the old windows you had, that wasn't very clever after all
Start-------Run-------and type : msconfig --------- now in the fourth tab called BOOT INI you can change it ;)
restart, hit the correct f key....it varies on each machine...expect it to take a while. You have to get into the net bios setting to change the boot sequence, its pretty obvious though once you are in it.
I had to replace win98 on four office machines......had to upgrade to windows xp pro....you can get the update for 199, or the complete bootable disk for 299......your problems will be solved if you completely blow out the operating system.
I then, two weeks ago had to replace the office main, wndows 2000 server......to windows xp pro....it is so much happier!
When you installed the second copy, you re-wrote the master boot record of the disk. You can't modify that. You will have to do a new install to C:\windows. Later versions of windows (2000 and XP) simply mark the MBR to point to an initialising file and this allows for modification.
How can I change the root directory letter of a drive?
For example, my external drive from drive ';E'; to drive ';F';.How can I change the root directory letter of a drive?
RIGHT-CLICK MY COMPUTER%26gt;%26gt;MANAGE%26gt;%26gt; Under STORAGE%26gt;%26gt;DISK MANAGEMENT%26gt;%26gt;RIGHT CLICK ont he DRIVE LETTER you want to change.How can I change the root directory letter of a drive?
That would be correct, if you are using XP
RIGHT-CLICK MY COMPUTER%26gt;%26gt;MANAGE%26gt;%26gt; Under STORAGE%26gt;%26gt;DISK MANAGEMENT%26gt;%26gt;RIGHT CLICK ont he DRIVE LETTER you want to change.How can I change the root directory letter of a drive?
That would be correct, if you are using XP
How do I list the files in a Directory in Alphabetical Order?(and output them to a .txt)?
I know how to change the Directory using cd, and I know how to use the dir /s /b %26gt; Videos.txt
But when I do that they aren't in alphabetical order? Is there a way to do it in alphabetical order?How do I list the files in a Directory in Alphabetical Order?(and output them to a .txt)?
try with some of the following freewares:
But when I do that they aren't in alphabetical order? Is there a way to do it in alphabetical order?How do I list the files in a Directory in Alphabetical Order?(and output them to a .txt)?
try with some of the following freewares:
How do i change the temp directory of Microsoft Access?
I have a huge 1.5 gig database file. I am trying to sort it. Every time i sort it, i get a message, that my c drive is losing space, and then access tells me that there aren't enough resources. I don't have big drives, and C is only taken up by windows and other neccessary stuff. How can i make Access use a folder, say in an external hardrive, as a temp folder?How do i change the temp directory of Microsoft Access?
Wow. Where to even begin...
I guess there would be a lot of questions that would need to be answered before any specific advice could be given.
What version of Access are you using?
Has the Dbase been split into a front end/backend?
Are you running it off of a Network with the Server holding the Tables and the Workstations running the App?
Are you running everything off of one computer?
How much free space do you currently have on your hard drive?
Why do you want to hold it in a temp file? Would it not be easier to move the entire Dbase onto a new drive? I know you said you had no big drives, but at this point it might be easier to install a new one, be it an internal or USB. At least they're cheap these days. Heck, an 80 gig drive would be more than enough to do the job and would only run you $70 or so.
Now, when you say you are trying to ';Sort it'; do you mean that you are try to filter the data with a query? If that's the case, maybe the computer is running low on RAM trying to filter out the monster Dbase of yours. Of course, running low on RAM would force the computer to depend on virtual memory (your hard drive). If your hard drive is low on space, then you definately need a new drive. If your drive still has space on it, then I would try to increase the size of your Virtual memory.
That's just off the top of my head. If you could please post more info, I will be able to help you out a bit more (or at least try to!)
I will check back daily until the question is resolved.
Hope this helps.
**************************************?br>
Wow. That is a project. Gimme a day or so to think this one over.
Wow. Where to even begin...
I guess there would be a lot of questions that would need to be answered before any specific advice could be given.
What version of Access are you using?
Has the Dbase been split into a front end/backend?
Are you running it off of a Network with the Server holding the Tables and the Workstations running the App?
Are you running everything off of one computer?
How much free space do you currently have on your hard drive?
Why do you want to hold it in a temp file? Would it not be easier to move the entire Dbase onto a new drive? I know you said you had no big drives, but at this point it might be easier to install a new one, be it an internal or USB. At least they're cheap these days. Heck, an 80 gig drive would be more than enough to do the job and would only run you $70 or so.
Now, when you say you are trying to ';Sort it'; do you mean that you are try to filter the data with a query? If that's the case, maybe the computer is running low on RAM trying to filter out the monster Dbase of yours. Of course, running low on RAM would force the computer to depend on virtual memory (your hard drive). If your hard drive is low on space, then you definately need a new drive. If your drive still has space on it, then I would try to increase the size of your Virtual memory.
That's just off the top of my head. If you could please post more info, I will be able to help you out a bit more (or at least try to!)
I will check back daily until the question is resolved.
Hope this helps.
**************************************?br>
Wow. That is a project. Gimme a day or so to think this one over.
DOS command to delete the file in the directory above your current directory?
';del ..'; seems to delete everything in the directory above current but I can not figure out how to delete a single file without just changing the directory to the proper and deleting it from there.DOS command to delete the file in the directory above your current directory?
del ../filenameDOS command to delete the file in the directory above your current directory?
del ..\filename.ext
del ../filenameDOS command to delete the file in the directory above your current directory?
del ..\filename.ext
My computer saves programs in the wrong hard drive, how do i change wich one it saves programs to?
My computer is a Windows xp SP2 and, in ';my computer'; it shows 2 Hard drives: one wich is 5 gb and the other 120 gb and even if, when i install a program, i change the directory to the bigger HD( because the first directory it gives me is to the small one), it saves some things in the small HD so now the 5 gb HD is full in i can't install anithing on the computer, please help me!!!My computer saves programs in the wrong hard drive, how do i change wich one it saves programs to?
you need to be using 'save as' and not 'save' to store your files, and specifying the drive you want the files stored in....
As for the files you already have stored in the worng directory, then just cut and paste them into the right drive, and they will move from one drive to another....myspace live curly hair styles
you need to be using 'save as' and not 'save' to store your files, and specifying the drive you want the files stored in....
As for the files you already have stored in the worng directory, then just cut and paste them into the right drive, and they will move from one drive to another....
In dos command how can we change the dir?
using dos command how can we change the directory?eg C:\%26gt; to D:\%26gt;.In dos command how can we change the dir?
c: enter
d: enterIn dos command how can we change the dir?
CD C:
will change drive to C
CD D:
For D etc...
c: enter
d: enterIn dos command how can we change the dir?
CD C:
will change drive to C
CD D:
For D etc...
Should I change a registry file to get my game to work? Or change the directory some how?
My game is installed on a external hard drive. It used to be registered as G: on my laptop. But now it is suddenly I:
As a result my game will not run. When hitting play it says it can't find the G:/Program Files/Microsoft Games/ blah blah file. And when I click on the executable in the hard drive it says it can't locate the game elements.
So either I go into the registry and find the file and change it so it looks in the I: drive. Or I figure out how to change my external hard drive back to G:
Can anyone help? And/or explain how to do it?Should I change a registry file to get my game to work? Or change the directory some how?
Right click on the desktop icon, properties, and then where it says start in (for example) ';C:\Program Files\Microsoft Games\Halo Custom Edition';, if my c drive got renamed as D, then change it to this: ';D:\Program Files\Microsoft Games\Halo Custom Edition';
Make sense?
As a result my game will not run. When hitting play it says it can't find the G:/Program Files/Microsoft Games/ blah blah file. And when I click on the executable in the hard drive it says it can't locate the game elements.
So either I go into the registry and find the file and change it so it looks in the I: drive. Or I figure out how to change my external hard drive back to G:
Can anyone help? And/or explain how to do it?Should I change a registry file to get my game to work? Or change the directory some how?
Right click on the desktop icon, properties, and then where it says start in (for example) ';C:\Program Files\Microsoft Games\Halo Custom Edition';, if my c drive got renamed as D, then change it to this: ';D:\Program Files\Microsoft Games\Halo Custom Edition';
Make sense?
How do I change the initial directory in the command prompt?
When one opens command prompt, it automatically opens to some file
c:\whateverfile %26gt;
how would I make the command prompt open to a different file?
ThanksHow do I change the initial directory in the command prompt?
If you're always going to be opening it from the Start menu, right click on the Command Prompt icon and pick ';properties';. Put the directory you want it to default to under ';start in';.How do I change the initial directory in the command prompt?
type cd (then whatver)
(i.e. cd d:\)
c:\whateverfile %26gt;
how would I make the command prompt open to a different file?
ThanksHow do I change the initial directory in the command prompt?
If you're always going to be opening it from the Start menu, right click on the Command Prompt icon and pick ';properties';. Put the directory you want it to default to under ';start in';.How do I change the initial directory in the command prompt?
type cd (then whatver)
(i.e. cd d:\)
I am just getting into computers and wants to learn how to create files using the old microsoft system DOS. ??
I need to learn the basic command promp ,how to change directory edit directory,the direct route to a file and root directory.tell me as much as you could so I can practice. Thank you.I am just getting into computers and wants to learn how to create files using the old microsoft system DOS. ??
Google for: DOS commandsI am just getting into computers and wants to learn how to create files using the old microsoft system DOS. ??
You need to install DOS first.
The WinXP and higher (Vista) no DOS installed at all.
You will need Windows 98 etc to learn DOS.
If its only command prompt then open command prompt, type help and hit enter
You will see all the commands and short explanation.
Google for: DOS commandsI am just getting into computers and wants to learn how to create files using the old microsoft system DOS. ??
You need to install DOS first.
The WinXP and higher (Vista) no DOS installed at all.
You will need Windows 98 etc to learn DOS.
If its only command prompt then open command prompt, type help and hit enter
You will see all the commands and short explanation.
How do you I change my Yahoo Directory Listing?
My company Richardson Seating http://www.richardsonseating.com has been listed with Yahoo Directory since before they started to charge. We are not really in the correct category and our description isn't that accurate. I tried submitting a help request under the yahoo directory subject but I received a generic reply telling me to look it up or ask here. Neither of those options offers me a way to contact someone for a change.
Thanks,
Richardson SeatingHow do you I change my Yahoo Directory Listing?
click edit directory listingdog games
Thanks,
Richardson SeatingHow do you I change my Yahoo Directory Listing?
click edit directory listing
On PHPBB how do I change the CACHE directory from unwritable to writable?
This is the coding how should i change it to make it writable:
______________________________________
%26lt;Files *%26gt;
Order Allow, Deny
Deny from All
%26lt;/Files%26gt;On PHPBB how do I change the CACHE directory from unwritable to writable?
You can just CHMOD the directory to 777 to make it writeable/readable/executable by all. Here's a good guide: http://www.comptechdoc.org/os/linux/usersguide/linux_ugfilesp.html
______________________________________
%26lt;Files *%26gt;
Order Allow, Deny
Deny from All
%26lt;/Files%26gt;On PHPBB how do I change the CACHE directory from unwritable to writable?
You can just CHMOD the directory to 777 to make it writeable/readable/executable by all. Here's a good guide: http://www.comptechdoc.org/os/linux/usersguide/linux_ugfilesp.html
How do I change the directory in which Python Interpreter looks for a module on the 'import ' command?
Ok, so I have several version of python from 2.5 to 3, and they all attempt to look for a module upon the import command at the same place, that is my home directory. If i move the modules to say each's site-packages direction, as this is where they should belong, it says that there is no such module when I use the 'import' command.
How do I redirect where Python look for a module?
ThanksHow do I change the directory in which Python Interpreter looks for a module on the 'import ' command?
When looking for a module, Python searches the list of directories contained in the sys.path variable.
Every build of Python has a built-in list of directories that it will search when looking for a module, and that built-in list provides the initial value of sys.path. You can specify additional directories in the PYTHONPATH environment variable, and you can use command-line options to disable some parts of the search path. You can also have your program modify sys.path before it tries to import your module.
The site-packages directory should be on the built-in search path, so if you're putting If your module there and Python doesn't find it then that's pretty strange. I'd check to see that the site-packages directory really is on the built-in path, by running a two-line program that does just:
聽聽import sys
聽聽print sys.path
If it is, then I'd check the permissions on my module in the site-packages directory. On a Unix system if you put them there while logged in as root, it's possible that they aren't readable when you're logged in as yourself.
How do I redirect where Python look for a module?
ThanksHow do I change the directory in which Python Interpreter looks for a module on the 'import ' command?
When looking for a module, Python searches the list of directories contained in the sys.path variable.
Every build of Python has a built-in list of directories that it will search when looking for a module, and that built-in list provides the initial value of sys.path. You can specify additional directories in the PYTHONPATH environment variable, and you can use command-line options to disable some parts of the search path. You can also have your program modify sys.path before it tries to import your module.
The site-packages directory should be on the built-in search path, so if you're putting If your module there and Python doesn't find it then that's pretty strange. I'd check to see that the site-packages directory really is on the built-in path, by running a two-line program that does just:
聽聽import sys
聽聽print sys.path
If it is, then I'd check the permissions on my module in the site-packages directory. On a Unix system if you put them there while logged in as root, it's possible that they aren't readable when you're logged in as yourself.
How to change system directory while in safe mode command prompt?
My system is infected with oufddh.exe.I was able to remove it from c drive by the following procedure.
Go into safe mode with ms-dos, type ';cd..'; twice until you got the C:%26gt;
Then type ';attrib autorun.inf -r -s -h'; and enter,
then type';del autorun.inf';, done.
This must be done with every single hard drive or USB drive
The problem is i dont know how to scan in other drives and usb drives.Infact i dont know the command to change the drive.Please help me.How to change system directory while in safe mode command prompt?
typr A: for the A drive F: for the F drive
E: well you get it.I think thats what you asking.
Go into safe mode with ms-dos, type ';cd..'; twice until you got the C:%26gt;
Then type ';attrib autorun.inf -r -s -h'; and enter,
then type';del autorun.inf';, done.
This must be done with every single hard drive or USB drive
The problem is i dont know how to scan in other drives and usb drives.Infact i dont know the command to change the drive.Please help me.How to change system directory while in safe mode command prompt?
typr A: for the A drive F: for the F drive
E: well you get it.I think thats what you asking.
How can I change the default directory when I choose to save, open, or explore my files?
My computer has been set up to open folders and drives that I have chosen not to use because of the lack of space. I would rather be using a different drive and I would like Microsoft Word and other programs like it to automatically open to this drive when I press ';Open'; or ';Save as.'; Is there a way to set this up?How can I change the default directory when I choose to save, open, or explore my files?
For all the Microsoft Office products, open each one and go to
Tools
Options
File Locations
and set the drive/path you want. SAVE your change(s)
Hopefully the other applications should offer a similar approach.
For all the Microsoft Office products, open each one and go to
Tools
Options
File Locations
and set the drive/path you want. SAVE your change(s)
Hopefully the other applications should offer a similar approach.
How would you get a batch file to change its directory back to its starting directory?
I am writing a batch file that will set some files up on the c: drive whereas the batch file it running on my flashdrive whoes symbol changes from computer to computer. Part way through, the only way to acomplish the task is to go to the c: drive, but how would I get the batch file to bring itself back to the original directory from which it was launched on the flashdrive.
Basically: I want to have ';cd'; direct the command prompt to its directory of birth (where it was started).How would you get a batch file to change its directory back to its starting directory?
There are programs called 'push' and 'pop' (and techniques to do the same thing). You push the current directory, do anything you want, then pop and you're back to where you were when you pushed. (4DOS had these as internal commands.)
http://www.fpschultze.de/smartfaq+faq.fa is one way to do it.>windows update clearing up my skin
Basically: I want to have ';cd'; direct the command prompt to its directory of birth (where it was started).How would you get a batch file to change its directory back to its starting directory?
There are programs called 'push' and 'pop' (and techniques to do the same thing). You push the current directory, do anything you want, then pop and you're back to where you were when you pushed. (4DOS had these as internal commands.)
http://www.fpschultze.de/smartfaq+faq.fa is one way to do it.
How do I change the installation directory?
I'm trying to install a disc that I found that is labled: Xplosiv RollerCoaster Tycoon 3 and RCT3 Soaked. I went to install it and it has no option to change the install directory.How do I change the installation directory?
RTC3 asks about the installation type during the installation process there is a custom installation choice check that so the drive change option will be enabled.
RTC3 asks about the installation type during the installation process there is a custom installation choice check that so the drive change option will be enabled.
Unix count amount of files in ONE directory using bash?
atm my code looks like totalNum=`ls -l . | egrep -c '^-' ./submissions`
when taking off the ./submissions it lists the files correctly in the current directory.. when i add the ./submissions it just gives me 0. any ideas on how to replace the ./submissions with a directory change that WILL work?Unix count amount of files in ONE directory using bash?
egrep is trying to find a ';-'; at the beginning of ';./submissions'; as input string.
You want to have
ls -l ./submissions | egrep -c '^-'
if you want to count the files in the directory ./submissions, then you have to tell ls to look in that directory. You've kinda mis-understood the piping syntax or what egrep does.
The command I have given does the following:
lists entries in long format for the directory ./submissions.
The output from that ls command is piped into egrep which counts the instances of lines which start with a - character.
Your version lists the files in long format for the directory . and pipes that input into egrep which counts instances of - at the start of the string ';./submissions';. In this case, egrep ignores the pipe because egrep -c '^-' ./submissions is a ';full'; command (i.e. it has input specified already). The returned count is zero because ';./submissions'; doesn't start with a - character.
:%26gt;
when taking off the ./submissions it lists the files correctly in the current directory.. when i add the ./submissions it just gives me 0. any ideas on how to replace the ./submissions with a directory change that WILL work?Unix count amount of files in ONE directory using bash?
egrep is trying to find a ';-'; at the beginning of ';./submissions'; as input string.
You want to have
ls -l ./submissions | egrep -c '^-'
if you want to count the files in the directory ./submissions, then you have to tell ls to look in that directory. You've kinda mis-understood the piping syntax or what egrep does.
The command I have given does the following:
lists entries in long format for the directory ./submissions.
The output from that ls command is piped into egrep which counts the instances of lines which start with a - character.
Your version lists the files in long format for the directory . and pipes that input into egrep which counts instances of - at the start of the string ';./submissions';. In this case, egrep ignores the pipe because egrep -c '^-' ./submissions is a ';full'; command (i.e. it has input specified already). The returned count is zero because ';./submissions'; doesn't start with a - character.
:%26gt;
How do you change extensions in MS-DOS?
Working on a lab now and need a little assistence.
Heres the question:
The diskette has three COBAL files (.cbl and .cbf). Copy them into your new directory, changing the extension to .c for both files as you copy.
I know how to copy the files into the new directory but not sure how to change the extensions.
Thx for your help.How do you change extensions in MS-DOS?
to create directory lets say our new directory is ';new';
c:\%26gt; md new
c:\%26gt; copy *.cb* c:\new
c:\%26gt; ren *.cb* *.c
Done.How do you change extensions in MS-DOS?
Use wildcards as follows:
COPY *.cbl NEWDIR\*.c
Extensions will be changed in the new directory.
hope this helps.
It's been a long time since I've used DOS but when you copy the files you should be able to supply a new name. So when you type the new name just type the same name but with .c at the end.
Heres the question:
The diskette has three COBAL files (.cbl and .cbf). Copy them into your new directory, changing the extension to .c for both files as you copy.
I know how to copy the files into the new directory but not sure how to change the extensions.
Thx for your help.How do you change extensions in MS-DOS?
to create directory lets say our new directory is ';new';
c:\%26gt; md new
c:\%26gt; copy *.cb* c:\new
c:\%26gt; ren *.cb* *.c
Done.How do you change extensions in MS-DOS?
Use wildcards as follows:
COPY *.cbl NEWDIR\*.c
Extensions will be changed in the new directory.
hope this helps.
It's been a long time since I've used DOS but when you copy the files you should be able to supply a new name. So when you type the new name just type the same name but with .c at the end.
How do i change the default user home directory in windows server 2008 r2?
hi im trying to change the home directory in windows server 2008 to a second drive eg: L:\users\(username)
i have the enterprise edition of the serverHow do i change the default user home directory in windows server 2008 r2?
run LanHelper, open Users managment, perform Vew Users action, then you can change it.
===========================
LanHelper is an advanced network management software for Windows servers and workstations, which integrates NT administration utilities and LAN monitoring features. Owing to the optimized user interface, LanHelper allows network administrators to administer numerous remote computers simultaneously at high speed. Detailed logs are available for helping network administrators to quickly find and solve network problems.
i have the enterprise edition of the serverHow do i change the default user home directory in windows server 2008 r2?
run LanHelper, open Users managment, perform Vew Users action, then you can change it.
===========================
LanHelper is an advanced network management software for Windows servers and workstations, which integrates NT administration utilities and LAN monitoring features. Owing to the optimized user interface, LanHelper allows network administrators to administer numerous remote computers simultaneously at high speed. Detailed logs are available for helping network administrators to quickly find and solve network problems.
How to change default download directory of psp??
Whenever I download a file from the internet from my psp,the file was saved into the PHOTO folder instead of the Game Folder.How can I change the default download directory on my psp internet explorer??
I use Netfront Internet Browser on my Psp 1004 running 5.50 Gen-D3How to change default download directory of psp??
Normally when you press download a pop-up should come up that shows you where you are going to save and then you could change it at the top... If it automatically downloads by itself then I don't know dude.Looking for a quilt display chest tvs
I use Netfront Internet Browser on my Psp 1004 running 5.50 Gen-D3How to change default download directory of psp??
Normally when you press download a pop-up should come up that shows you where you are going to save and then you could change it at the top... If it automatically downloads by itself then I don't know dude.
How can i change the save directory for an iphone firmware update 2.1?
Yea my itunes wants me to download and install something 2.1. My C disk is nearly full so i want to download the update to my D disk. how can i change where it will download/save to?How can i change the save directory for an iphone firmware update 2.1?
You can simply use the following link to download the firmware manually and save it to a location of your choice, but when you want to update your iphone to 2.1 click SHIFT + Restore and browse to where you saved the file.
2.1 for iPhone 3G:
http://appldnld.apple.com.edgesuite.net/content.info.apple.com/iPhone/061-5198.20080909.K3294/iPhone1,2_2.1_5F136_Restore.ipsw
2.1 for iPhone 1st generation:
http://appldnld.apple.com.edgesuite.net/content.info.apple.com/iPhone/061-5202.20080909.gkbEj/iPhone1,1_2.1_5F136_Restore.ipsw
You can simply use the following link to download the firmware manually and save it to a location of your choice, but when you want to update your iphone to 2.1 click SHIFT + Restore and browse to where you saved the file.
2.1 for iPhone 3G:
http://appldnld.apple.com.edgesuite.net/content.info.apple.com/iPhone/061-5198.20080909.K3294/iPhone1,2_2.1_5F136_Restore.ipsw
2.1 for iPhone 1st generation:
http://appldnld.apple.com.edgesuite.net/content.info.apple.com/iPhone/061-5202.20080909.gkbEj/iPhone1,1_2.1_5F136_Restore.ipsw
How to change a torrent directory while its running?
My C: part is full now. I have to change them into E:
what can I do? if I don't want to lose the downloaded parts?How to change a torrent directory while its running?
Stop trying to change it and change it.How to change a torrent directory while its running?
see you cannot change your directory if some files have being downloaded you have to make some space in C: unless all half downloaded files are completed after that u can change your directory.
make a backup of the torrent currently being downloaded in downloads folder, paste it back into downloads folder on your new harddrive,....download the torrent again and it will continue
Its impossible to change the directory of a file if it is being used. If you want to change the directory without loosing the downloaded parts, i suggest you close the torrent first and then copy the downloaded parts to the directory where you want it to bee. Then open the torrent. Change the directory in the settings to where you copied the parts.
That trick worked for me, i don't know if it will work with you too.
what can I do? if I don't want to lose the downloaded parts?How to change a torrent directory while its running?
Stop trying to change it and change it.How to change a torrent directory while its running?
see you cannot change your directory if some files have being downloaded you have to make some space in C: unless all half downloaded files are completed after that u can change your directory.
make a backup of the torrent currently being downloaded in downloads folder, paste it back into downloads folder on your new harddrive,....download the torrent again and it will continue
Its impossible to change the directory of a file if it is being used. If you want to change the directory without loosing the downloaded parts, i suggest you close the torrent first and then copy the downloaded parts to the directory where you want it to bee. Then open the torrent. Change the directory in the settings to where you copied the parts.
That trick worked for me, i don't know if it will work with you too.
How to change default directory in Microsoft Frontpage?
When I try to open an existing file using Microsoft Frontpage, it always defaults to look in the ';My Webs'; folder.
How do I change it so it looks in the directory where I keep all my web page files?
This program came bundled with a Microsoft Office package I got when I bought my computer and there was absolutely no documentation with it. I've looked just about everywhere I can think of within the program and can't find a way to do it.How to change default directory in Microsoft Frontpage?
To change Default Location
1- Click Start %26gt; Click Run %26gt; type “regedit” to run Registry Editor
2- find following:
HKEY_CURRENT_USER \ Software \ Microsoft \ FrontPage \ Explorer \ FrontPage Explorer \ Settings
3- Change the “DefaultWebName”
And finally restart your ComputerHow to change default directory in Microsoft Frontpage?
I am not sure what version you have but you can try going to the TOOLS menu and then choose Options. See if you have a File Locations Tab when Options opens up. If so, you will find it there. You highlight which Files type you want to change, click on Modify and choose the folder you wish to default to.
Good Luck.
research google
How do I change it so it looks in the directory where I keep all my web page files?
This program came bundled with a Microsoft Office package I got when I bought my computer and there was absolutely no documentation with it. I've looked just about everywhere I can think of within the program and can't find a way to do it.How to change default directory in Microsoft Frontpage?
To change Default Location
1- Click Start %26gt; Click Run %26gt; type “regedit” to run Registry Editor
2- find following:
HKEY_CURRENT_USER \ Software \ Microsoft \ FrontPage \ Explorer \ FrontPage Explorer \ Settings
3- Change the “DefaultWebName”
And finally restart your ComputerHow to change default directory in Microsoft Frontpage?
I am not sure what version you have but you can try going to the TOOLS menu and then choose Options. See if you have a File Locations Tab when Options opens up. If so, you will find it there. You highlight which Files type you want to change, click on Modify and choose the folder you wish to default to.
Good Luck.
research google
How do I change my PhpMyadmin Directory?
phpmyadmin is not in my htdocs folder, it is outside the htdocs folder so I do not know how it is accessed in the first place. Which config file would I alter to change the name of my phpmyadmin folder name in XAMPP? I searched php.ini and httpd.conf for any reference to phpmyadmin but was unable to locate it. I would like to rename the phpmyadmin location because I have just noticed a vulnerability scan in my logs which scans that directory, if I am able to change the directory I can prevent unwanted security breaches. I am using WinXP and XAMPP webserver.How do I change my PhpMyadmin Directory?
Try looking in lines 30 and 31 of
Drive:\xampp\apache\conf\extra
\httpd-xampp.conf
Just a tip:
If it ain't broke, don't fix it.How do I change my PhpMyadmin Directory?
I used Easy Apache. It lets me create multiple web folder and run them almost simultaneous in different IE tab.
You can put your different folders containing different web applications, assign an Alias on Easy Apache control panel and you can run it whenever you want. You can put your web folders in drive C or drive D, or even on your USB stick. It doesn't matter where it is. Just search for it on the net and download it
I also used Apache Lite- a portable run-and-forget web server. No need to install. get it here: http://itblog.tourwithher.net/ and click the download button link
Try looking in lines 30 and 31 of
Drive:\xampp\apache\conf\extra
\httpd-xampp.conf
Just a tip:
If it ain't broke, don't fix it.How do I change my PhpMyadmin Directory?
I used Easy Apache. It lets me create multiple web folder and run them almost simultaneous in different IE tab.
You can put your different folders containing different web applications, assign an Alias on Easy Apache control panel and you can run it whenever you want. You can put your web folders in drive C or drive D, or even on your USB stick. It doesn't matter where it is. Just search for it on the net and download it
I also used Apache Lite- a portable run-and-forget web server. No need to install. get it here: http://itblog.tourwithher.net/ and click the download button link
How can I change the install directory of a program?
Well I recently purchased a solid state drive, and have a 1TB HDD that I use to install my programs on. However, some programs do not allow me to chose the directory. How can I move them over and keep them properly working?How can I change the install directory of a program?
Try installing to the Desktop.
When done and tested, create a folder, like C:\Foo
(Use Windows or DOS commands)
(Foo is an example folder name)
Then Drag %26amp; Drop the files from the Desktop to the Foo folder.
;-)
Or...
(Using DOS from the Command screen)
CD \ (puts you in the main or root folder, Desktop) (don't forget the backslash)
MD Foo2 (Creates the Foo2 folder, MD, Make Directory or Folder)
Copy \Foo *.* C:\Foo2 (*.* means everything before the period and everything after the period, leave a space after the first *).
You now have copied the files in Foo to Foo2
If all OK, you can delete the files in Foo and then delete the Foo folder.
If I'm talkin' Chinese, forget it.
Learn some DOS instead.
To learn some DOS, from the Command screen, type ';Help/?'; (no quotes).
;-)How can I change the install directory of a program?
You can't.
If a program does not allow you to change the install directory, the you cannot change it.
By default many programs install themselves in the Windows Drive or C:\Program Files\...
So what you can do is install Windows on your new hard-disk and make the machine boot out of it. This will in turn make those program install them on it. But the flip side is that they will be deleted in case you format the disk or re-install your OS.how to talk to men grammarandspellingmistakes
Try installing to the Desktop.
When done and tested, create a folder, like C:\Foo
(Use Windows or DOS commands)
(Foo is an example folder name)
Then Drag %26amp; Drop the files from the Desktop to the Foo folder.
;-)
Or...
(Using DOS from the Command screen)
CD \ (puts you in the main or root folder, Desktop) (don't forget the backslash)
MD Foo2 (Creates the Foo2 folder, MD, Make Directory or Folder)
Copy \Foo *.* C:\Foo2 (*.* means everything before the period and everything after the period, leave a space after the first *).
You now have copied the files in Foo to Foo2
If all OK, you can delete the files in Foo and then delete the Foo folder.
If I'm talkin' Chinese, forget it.
Learn some DOS instead.
To learn some DOS, from the Command screen, type ';Help/?'; (no quotes).
;-)How can I change the install directory of a program?
You can't.
If a program does not allow you to change the install directory, the you cannot change it.
By default many programs install themselves in the Windows Drive or C:\Program Files\...
So what you can do is install Windows on your new hard-disk and make the machine boot out of it. This will in turn make those program install them on it. But the flip side is that they will be deleted in case you format the disk or re-install your OS.
How do i change the directory of my save games?
Hi, I have a few games and i wanted to take them in to school with me but i don't want to start a whole new game. I will pick my favorite and that is ';Black%26amp;White2'; so how do i change the save game directory of B%26amp;W2. In school i cant just send the save game in the directory because we have limited rights and we cant get on documents unless I log on as admin but that takes to long so is there any way i can just change it so it can save on my flash drive or something or a place where i can get to or just change it to a custom directory ?How do i change the directory of my save games?
Let me just get this out there, black and white 2 sucks. The first game is much better. There might be something in options that could help. Normally you can find a save location when you first install the game. Another fix is to go into windows media player and browse for new music. This allows you to get into the files that are normally blocked by windows explorer.
Let me just get this out there, black and white 2 sucks. The first game is much better. There might be something in options that could help. Normally you can find a save location when you first install the game. Another fix is to go into windows media player and browse for new music. This allows you to get into the files that are normally blocked by windows explorer.
How to change my cmd directory to documents and settings?
My computer have a virus and I am ready to used bots technique to remove this particular virus. I dont know how to changed the CMD directory. Please help me.How to change my cmd directory to documents and settings?
Like this:
cd documents and settings
It's the 'cd' command, stands for Change Directory.
EDIT: I just tried it (on Vista) and the quotes are not necessary.
The leading backslash is necessary if you are not already in the root directory (';\';).How to change my cmd directory to documents and settings?
you'll probably want to type it as
cd ';\documents and settings';
The backslash means that the documents and settings directory is in the root directory (which is where it is) and the quotes are needed because it has spaces in the name.
Like this:
cd documents and settings
It's the 'cd' command, stands for Change Directory.
EDIT: I just tried it (on Vista) and the quotes are not necessary.
The leading backslash is necessary if you are not already in the root directory (';\';).How to change my cmd directory to documents and settings?
you'll probably want to type it as
cd ';\documents and settings';
The backslash means that the documents and settings directory is in the root directory (which is where it is) and the quotes are needed because it has spaces in the name.
Subscribe to:
Posts
(Atom)